Pioneer XV-DV900 Resume and Last Memory, Using the top panel controls, Last Memory below, Button

03Getting started

Button	What it does
	Pauses a disc that’s playing, or
	restarts a paused disc.
	Stops playback.
	DVD and Video CD: The display
	shows Resume. Press again if
	you want to cancel the resume
	function. (See also Resume and
	Last Memory below.)
	Press to start fast reverse
	scanning. Press	(play) to
	resume normal playback.
	Press to start fast forward
	scanning. Press	(play) to
	resume normal playback.

Skips to the start of the current track or chapter, then to previous tracks/chapters.

Skips to the next track or chapter.

FOLDER +/– Skips to the next/previous folder

(SUB) when playing a JPEG or MP3 disc.

Numbers Use to enter a title/track/group/ chapter number. Press ENTER to select (or wait a few seconds).

•If the disc is stopped, playback starts from the selected title/ group (for DVD-Video/DVD- Audio) or track number (for SACD/CD/Video CD/Super VCD/ MP3).

•If the disc is playing, playback jumps to the start of the selected chapter or track (within the current group for DVD-Audio).

24

•You may find with some DVD discs that some playback controls don’t work in certain parts of the disc. This is not a malfunction.

•Track skip and number buttons for track selection do not work with unfinalized CD- R/RW discs.

Using the top panel controls

The OPEN/CLOSE, and (stop) buttons on the top panel work the same way as the remote control equivalents.

Resume and Last Memory

When you stop playback of a DVD or Video CD disc, Resume is shown in the display indi- cating that you can resume playback again from that point.

If the disc tray is not opened, the next time you start playback the display shows Resume and playback resumes from the resume point.

For DVD discs only: If you take the disc out of the player, the play position is stored in memory. When you load the disc next time, the display shows Last Mem and you can resume playback (this works for up to five discs).

If you want to clear the resume/last memory point, press (stop) while Resume or Last Mem is displayed.

•When a Video CD is loaded, the Resume point is lost if the system is switched off, or switched to a function other than DVD (CD).

•For the Last Memory function to work, you

must press (stop) to stop playback before opening the disc tray.

En