DVD/CD/Video CD player, Additional information, Problem

Additional information

Problem	Remedy
Timer indicator is	• Unplug the unit, then plug back in. Wait for one minute then switch on.
blinking and the	• Make sure the fan at the AMP section of the unit is not being blocked.
system will not switch	• Check that the speakers are connected correctly.
on.	• If the problem persists, take it to your nearest Pioneer
	authorized service center or your dealer for servicing.

DVD/CD/Video CD player

	Problem	Remedy
	The disc is ejected	• Clean the disc.
	automatically after	• Align the disc properly in the disc guide.
	loading.	• If the region number on a DVD-video disc does not match the number on
		the player, the disc cannot be used (see DVD Video regions on page 78).
		• Allow time for any condensation inside the player to evaporate. Avoid
		using the player near an air-conditioning unit.

	Playback is not	• If the disc is loaded upside down, reload the disc with the label side face
	possible.	up.

	Picture playback stops	• Press (stop), then (play) to start playback again.
	and the operation	• Switch the power off once, then on again using the front panel
	buttons cannot be
	buttons cannot be	STANDBY/ON button.
	used.	STANDBY/ON button.
	used.

Settings are canceled. • When the power is cut due to power failure or by unplugging the power

		cable, settings will be canceled.

	No picture/No color.	• Check that connections are correct and that plugs are inserted fully.
		• Check the instruction manual of the TV/monitor to make sure the TV/
		monitor settings are incorrect.
		• If your TV/monitor is connected using an S-video cable, try changing the
		S-Video Out setting (see S-Video Out on page 65).

	Screen is stretched or	• The TV Screen setting is incorrect. Set the TV Screen option to match the
	aspect does not
	aspect does not	TV/monitor you're using (see TV Screen on page 63).
	change.	TV/monitor you're using (see TV Screen on page 63).
	change.

	When recorded on a	• This system uses copy-protection technology which may prevent
	VCR or passed through	recording or cause picture problems when connected through a VCR or AV
	an AV selector, there is	selector. This is not a malfunction.
	disturbance in the
	playback picture.

English Italiano Français Deutsch Nederlands Español