Pioneer S-DV700ST manual Initial Settings menu, Video Output settings, Linear PCM Out, TV Screen

Initial Settings menu

•If you set to DTS with non-DTS compatible equipment, noise will be output when you play a DTS disc.

•DTS-CDs are always output as DTS digital audio regardless of this setting.

Linear PCM Out

• Default setting: Down Sample Off

Initial Settings
Digital Audio Mode	Dolby Digital Out	Down Sample On
Video Output	DTS Out	Down Sample Off
Language	Linear PCM Out
Display
Options

If the connected component is compatible with high sampling rates (96 kHz), set this to Down Sample Off, otherwise set it to Down Sample On (96 kHz audio is converted to a more compatible 48 kHz). Check the manual that came with the other component if you’re unsure whether it is 96 kHz compatible.

•Even when set to Down Sample Off, some discs will still output down-sampled audio through the digital outputs (you only get full sampling rate audio through the analog outputs).

Video Output settings

TV Screen

• Default setting: 16:9 (Wide)

Initial Settings
Digital Audio Mode	TV Screen	4:3 (Letter Box)
Video Output	Component Out	4:3 (Pan&Scan)
Language	S-Video Out	16:9 (Wide)
Display
Options

If you have a widescreen TV, select the 16:9 (Wide) setting—widescreen DVD software is then shown using the full screen area. When playing software recorded in conventional (4:3) format, the settings on your TV will determine how the material is presented— see the manual that came with your TV for details on what options are available.

If you have a conventional TV, select either 4:3 (Letter Box) or 4:3 (Pan & Scan). In Letter Box mode, widescreen software is shown with black bars at the top and bottom of the screen. Pan & Scan chops the sides off widescreen material to make it fit the 4:3 screen (so even though the image looks larger on the screen, you’re actually seeing less of the picture). See also Screen sizes and disc formats on page 87.

10

English Italiano Français Deutsch Nederlands Español

63

En