Pioneer S-DV900SW, XV-DV900 Connecting using the S-video output, Recording mode, Press Enter Use

11Other connections

Recording mode

The Recording mode allows you to make analog recordings from the LINE 1 (OUT) jacks.

When Recording mode is on, most sound- related functions (including SURROUND,

ADVANCED, AUTO, SYSTEM SETUP) become inactive. The display will briefly blink RecMode On if you try and use a prohibited function while Recording mode is on.

When Recording mode is off, the audio from the analog output may be interrupted, depending on the operation.

1	Press SOUND.
2	Use the	(cursor left/right)
buttons to select ‘Rec Mode?’.
3	Press ENTER.
4	Use the	(cursor up/down)

buttons to select ‘R.Mode On’ or ‘R.Mode Off’.

•When Recording Mode is On a stereo downmix of multi-channel DVD-Audio and SACD discs is output from the speakers and from the analog audio jacks. Note that with some DVD-Audio disc, only the front left/right channels are output. When set to Off, multi-channel DVD-Audio and SACD discs are played through all the speakers, but front L/R audio is output from the analog audio jack.

•When R.Mode On is selected while playing SACD, the unit will loose speaker SW output and bass will become inaudible.

Connecting using the S-video output

If your TV has an S-video input, you can use this instead of the standard video output for a better quality picture.

•Use an S-video cable (not supplied) to connect the S-VIDEO OUT to an S-video input on your TV.

Line up the small triangle above the jack with the same mark on the plug before plugging in.

S-VIDEO

INPUT

TV

ANTENNA

E1	S-VIDEO	VIDEO
	OUT	OUT
	VIDEO	L				FM UNBAL		AM L
						75		ANTE
				AUDIO	PR	PB	Y
		R
NE1		TV	LINE1	LINE2
UT						COMPONENT
		IN	IN	IN		VIDEO OUT

XV–DV900 /XV–DV700

•The S-video ouptut is switchable between S1 and S2 formats for compatibility with all TVs. See S-Video Out on page 65 for more on this.

74

En