12Additional information
Chapter 12
Additional information
Switching off the demo
• Default setting: Demo On
This system has an automatic demo feature that starts when the system is plugged in for the first time.
1Switch the system into standby.
2Press SYSTEM SETUP.
3 Use the (cursor left/right) buttons to select ‘Demo Mode?’, then press ENTER.
4 Use the | (cursor up/down) |
buttons to select ‘Demo Off?’ then press ENTER to confirm.
•After setting the clock, the demo mode switches off automatically. However, if you unplug the system from the wall outlet, the demo mode will revert to Demo On (and the clock will be reset).
Child Lock
• Default setting: Lock Off
This system has a child lock feature that makes the front panel buttons and controls inoperative.
1Switch the system into standby.
2Press SYSTEM SETUP.
3 Use the (cursor left/right) buttons to select ‘Child Lock?’, then press
ENTER.
4 Use the (cursor up/down) buttons to select ‘Lock On?’ or ‘Lock Off?’.
5 Press ENTER to confirm.
Changing the clock format
• Default setting:
You can choose to display the clock in either 12 or 24 hour formats.
1Switch the system into standby.
2Press SYSTEM SETUP.
3 Use the (cursor left/right) buttons to select ‘12/24 Hour?’, then press
ENTER.
4 Use the (cursor up/down) buttons to select either
5 Press ENTER to confirm.
Changing the frequency step
• Default setting: FM 100 AM 10
If you find that you can’t tune into stations successfully, the frequency step may not be suitable for your country/region.
1Switch the system into standby.
2Press SYSTEM SETUP.
3 Use the (cursor left/right) buttons to select ‘FM AM Step?’, then press ENTER.
4 Use the | (cursor up/down) |
buttons to select ‘FM 50 AM 9?’ or ‘FM 100 AM 10?’ then press ENTER to confirm.
76
En
