10Initial Settings menu
Component Out
You only need to make this setting if you connected this system to your TV using the component video outputs.
• Default setting: Interlace
Initial Settings |
|
|
Video Output | TV Screen | Interlace |
Language | Component Out | Progressive |
Display |
| |
Options |
|
|
If you have a
When setting to Progressive, you have to press ENTER once more to confirm (or RETURN to cancel). See also below for important information on progressive scan video.
About progressive scan video
Compared to interlace video, progressive scan video effectively doubles the scanning rate of the picture, resulting in a very stable,
•When Component Out (above) is set to Progressive, there is no video output from the VIDEO and
64
•If you connect a TV that is not compatible with a progressive scan signal and switch the system to progressive, you will not be able to see any picture at all. In this case,
press STANDBY/ON to put the system in standby, then press and hold the front panel (stop) button for about 8 seconds until the display shows Mem.Clr.?. Press the front panel VOL – or + button so that the display shows Interlace?. Press the
front panel button to set to interlace and switch the system back on.
Compatibility of this system with
This system is compatible with progressive video Macro Vision System Copy Guard.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE “STANDARD DEFINITION” OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
This system is compatible with the following Pioneer displays and monitors:
En
