Installation and Connections

Before installing or connecting the unit, please read the following and pages 3 and 5 of this manual thoroughly for proper use.

Warning

MAKE THE CORRECT CONNECTIONS.

Failure to make the proper connections may result in fire or product damage.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

Caution

HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.

The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.

Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury due to electrical shorts.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.

When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE.

Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wire’s insulation from being cut by the metal edge of the hole.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.

Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury.

If swallowed, consult a physician immediately.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT.

Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS.

Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, gear lever, brake pedals, etc. can be extremely hazardous.

Precautions

•Be sure to disconnect the cable from the (–) battery post before installing your CDA-9857. This will reduce any chance of damage to the unit in case of a short-circuit.

•Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicle's electrical system.

•When making connections to the vehicle's electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the CDA-9857 to the fuse box, make sure the fuse for the intended circuit of the CDA-9857 has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your Alpine dealer.

•The CDA-9857 uses female RCA-type jacks for connection to other units (e.g. amplifier) having RCA connectors. You may need an adaptor to connect other units. If so, please contact your authorized Alpine dealer for assistance.

•Be sure to connect the speaker (–) leads to the speaker (–) terminal. Never connect left and right channel speaker cables to each other or to the vehicle body.

IMPORTANT

SERIAL NUMBER:

 

 

Please record the serial number of your unit in the space provided

INSTALLATION DATE:

 

 

below and keep it as a permanent record. The serial number or the

INSTALLATION TECHNICIAN:

 

 

engraved serial number is located on the bottom of the unit.

PLACE OF PURCHASE:

 

 

 

 

 

 

 

 

31-EN

Page 32 Page 34
Page 33
Image 33
Alpine CDA-9857 owner manual Installation and Connections, 31-EN
Page 32 Page 34

CDA-9857 specifications

The Alpine CDA-9857 is a versatile single DIN car stereo that combines advanced sound quality with user-friendly features, making it a popular choice among car audio enthusiasts. Launched in the mid-2000s, it reflects Alpine's commitment to innovation, providing drivers with an exceptional listening experience. The CDA-9857 stands out due to its extensive sound tuning capabilities, allowing users to customize audio settings to suit their preferences.

One of the key features of the CDA-9857 is its 24-bit DAC (Digital-to-Analog Converter), which enhances sound clarity and detail. This technology significantly improves audio playback quality, making music sound crisp and well-defined across all genres. Additionally, the stereo supports multiple audio formats, including MP3, WMA, and AAC, ensuring compatibility with various media sources.

The CDA-9857 is equipped with a built-in EQ, featuring customizable presets and a 3-band parametric EQ. This allows users to adjust the bass, midrange, and treble frequencies independently, tailoring the audio output to match the acoustics of their vehicle. Furthermore, the stereo includes Alpine's proprietary “Media Xchange” technology, which enables the connection of external devices, like iPods and USB drives, thus allowing easy access to vast music collections.

For those who prioritize connectivity, the CDA-9857 features AUX inputs, a front USB port, and is compatible with Bluetooth hands-free calling when paired with a Bluetooth adapter, ensuring safety and convenience while driving. The unit also includes a convenient remote control, allowing easy navigation of its numerous options without having to reach for the dial.

Visually, the CDA-9857 boasts an attractive design, featuring a vibrant blue illuminated display that enhances readability and complements most car interiors. Its ergonomic controls make it user-friendly, enabling quick adjustments while on the go.

Overall, the Alpine CDA-9857 stands out as a feature-rich unit with a robust set of technologies designed to enhance the car audio experience. With its exceptional sound quality, customizable features, and excellent connectivity options, the CDA-9857 remains a solid choice for anyone looking to improve their in-car entertainment system.
Top Page Image Contents