Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first time, after changing the car battery, etc.
1Turn off the unit power.
2Press 
(OPEN) to open the front panel, then remove it.
3Press RESET with a ballpoint pen or similar pointed object.
RESET switch
Adjusting Volume
Turn the Rotary encoder until the desired sound is obtained.
Lowering Volume Quickly
Activating the Audio Mute function will instantly lower the volume level by 20 dB.
Press MUTE to activate the MUTE mode.
The audio level will decrease by about 20 dB.
Pressing MUTE again will bring the audio back to its previous level.
Setting the Time and Calendar
1Press MENU to select SETUP, then press MODE.
BBE 
BASS ENGINE 
SETUP 
RETURN (OFF)
BBE
2Press 
or 
to select the GENERAL mode, then press MODE.
GENERAL 
TUNER 
AUDIO 
DISPLAY 
DEMO
3Press 
or 
to select “Clock Adjust,” then press MODE.
4Turn the Rotary encoder to set year.
5Press MODE.
6Repeat steps 4 and 5 above to set month, day, hour and minutes.
7Press MENU to select RETURN.
After 2 seconds, the unit returns to normal mode. Pressing and holding MENU for at least 2 seconds will return to normal mode.
•To synchronize the clock to another clock/watch or radio time announcement, press and hold MODE for at least 2 seconds after setting the “hour.” Minutes will reset to 00. If the display shows over “30” minutes when you do this, the time will advance one hour.
