Alpine CDA-9857 Setting the Treble Control, Setting the BBE Mode, Setting the Treble Level, 14-EN

Models: CDA-9857

1 41
Download 41 pages 21.29 Kb
Page 16
Image 16
Setting the Treble Control

Setting the Treble Control

You can change the Treble Frequency emphasis to create your own tonal preference.

1Press MENU to select the BASS ENGINE mode, then press MODE.

BBE Setting the Treble Center Frequency BASS ENGINE Setting the Treble Level SETUP Setting the BBE Mode RETURN (OFF) 14-EN BBE

2Press Manual background or Manual background to select the TREBLE (Treble Center Frequency) control mode.

BASS Manual background TREBLE

Setting the Treble Center Frequency

3-1 Press SOURCE/POWER to select the desired treble center frequency.

10.0kHz Manual background 12.5kHz Manual background 15.0kHz Manual background 7.5kHz Manual background 10.0kHz

Emphasize the displayed treble frequency ranges.

Setting the Treble Level

3-2*Turn the Rotary encoder to select the desired treble level (–7~+7).

You can emphasize the treble level.

4Press MENU to select RETURN.

After 2 seconds, the unit returns to normal mode. Pressing and holding MENU for at least 2 seconds will return to normal mode.

If no operation is performed within 60 seconds, the treble control setting will be turned off automatically.

The treble level settings will be individually memorized for each source (FM, AM, CD, etc.) until the setting is changed. The Treble frequency settings adjusted for one source are effective for all other sources (FM, AM, CD, etc.).

Depending on the connected devices, some functions and display indications do not work. However, Treble Level is still adjustable if an audio processor with the Treble function is connected.

This function is inoperable when DEFEAT is set to ON.

While in the treble adjusting mode, BASS CONTROL adjusting mode

can be recalled by pressing Manual background or Manual background .

*The adjustment can also be made by pressing MODE. Refer to "Adjusting Bass/Treble/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat" (page 13).

Setting the BBE Mode

BBE makes vocals or instruments sound distinct regardless of the music source. The Radio (except AM), CD, MP3 and iPod, will be able to reproduce the music clearly even in cars with a lot of road noise.

1Press SOURCE/POWER to select the source to which you want to apply BBE.

2Press MENU to select BBE mode, then press MODE.

BBE Manual background BASS ENGINE Manual background SETUP Manual background RETURN (OFF) Manual background BBE

3Press Manual background to set the BBE mode ON.

BBE OFF*

 

BBE ON

 

(Mode 1 to 3, Non Effect)

4Turn the Rotary encoder to select your preferred BBE Mode (1 to 3) or Non Effect.

5Press MENU to select RETURN.

After 2 seconds, the unit returns to normal mode. Pressing and holding MENU for at least 2 seconds will return to normal mode.

*To cancel BBE mode for all music sources, press Manual background to select BBE OFF in step 3.

Each music source, such as FM radio, CD (included MP3/WMA) can have its own BBE setting.

This function is inoperable when DEFEAT is set to ON.

There is no BBE mode for AM radio.

When an external audio processor is connected, this setting cannot be made.

If no operation is performed in 60 seconds, the unit returns to normal mode.

14-EN

Page 16
Image 16
Alpine CDA-9857 owner manual Setting the Treble Control, Setting the BBE Mode, Setting the Treble Center Frequency, 14-EN