Basic Call Handling
Cisco Unified Wireless IP Phone 7921G Phone Guide for Cisco Unified Communications Manager 7.0 45
Using cBarge
You can create a conference by using cBarge to add yourself to a call on a shared line.
Using Meet-Me
Meet-Me conferencing allows you to start or join a conference by calling the conference number.
If you want to... Then...
Create a conference by
barging a call on a shared line
1. Press to select a call on a shared line.
2. Choose Options > cBarge.
See Using a Shared Line, page 54.
See a list of conference
participants or remove
participants
Choose Options > ConfList. See Viewing or Removing Conference
Participants, page 46.
If you want to... Then...
Start a Meet-Me conference 1. Obtain a Meet-Me phone number from your system administrator.
2. Distribute the number to participants.
3. When you are ready to start the meeting, choose Options >
MeetMe.
4. Dial the Meet-Me conference number.
5. Press .
Participants can now join the conference by dialing in.
Note Participants hear a busy tone if they call the conference before the
initiator has joined. In this case, participants must call back.
Join a Meet-Me conference 1. Dial the Meet-Me conference number (provided by the conference
initiator).
2. Press .
Note You will hear a busy tone if you call the conference before the
initiator has joined. In this case, try your call again.
End a Meet-Me conference All participants must hang up.
The conference does not automatically end when the conference
initiator disconnects.