Basic Call Handling
Cisco Unified Wireless IP Phone 7921G Phone Guide for Cisco Unified Communications Manager 7.0 33
• If parties on a call hear a beep tone, the call might be monitored or recorded. Ask your system
administrator for more information.
• If you hear a beep tone from your phone, you might be out of range of the wireless network. Move
to a location where you can see a strong signal icon on the phone if you wish to use your
phone.
Placing a Call—Additional Options
You can place calls using special features and services that might be available on your phone. See your
system administrator for more information abou t these additional options.
If you want to... Then...
For more information,
see...
Speed dial a contact number
in your local phone book
Do one of the following:
• Press and hold a speed-dial hot key for
about two seconds.
Note If dialing a two-digit number, enter the
first digit, then press and hold the
second digit for about two seconds.
• Choose > Speed Dials, highlight
a speed dial, and press .
Using the Phone Book
on Your Phone,
page 77
Speed Dialing, page 49
Speed dial a phone number
(for a Line View speed-dial
number set up on the web)
1. Press .
2. Scroll to a speed dial .
3. Press or to make the call.
Speed Dialing, page 49
Place a call while another
call is active (using a
different line)
1. Press Hold.
2. Press .
3. Scroll to another line and press .
4. Dial a number.
5. PPress to make the call.
Using Hold and
Resume, page 36
Place the call on a
secondary line
1. Press and scroll to another line.
2. Dial a number.
3. PPress to make the call.
Switching Between
Multiple Calls, page 38