![](/images/new-backgrounds/1126249/12624977x1.webp)
advanced features
39
Editing Using Another VCR
connect up Connect the player’s
AWhen using your VCR as the player ...
... connect its
BWhen using your VCR as the recorder ...
... connect its
set vcr’s input mode The recording VCR mode must be set to AUX. If this VCR is the recorder, press AUX and/or PR to select
set edit mode See Picture Control on page 31.
start source vcr Engage its PLAY mode.
start recording vcr Engage its RECORD mode.
NOTES:
•All necessary cables can be obtained from your dealer.
•For Y/C signal input/output, be sure to use a
•When you set PICTURE CONTROL to EDIT to dub tapes (☞ pg. 31), be sure to select AUTO (or NORM when B.E.S.T. is set to OFF) after you finish dubbing the tapes.