Wiring
Disconnect (red dotted) wire from the solenoid and reattach to the wire that goes from the pressure switch to the wire (green dotted) that goes to the toggle switch.
OPTIONAL 
REMOTE SWITCH
12 VDC POWER SOURCE
This can be any 12 power source. There are two types of power sources.
1- Direct- This is a power source that has continuous 12 VDC whether the ignition is on or off. The disadvantage of this is that if the switch is left on over the weekend and an air leak were to develop- the
2- Ignition Controlled- This is a power source that only has 12 VDC power when the keyed ignition is in the on position. The advantage of this is that the
Follow this line if you are not using a circuit breaker.
Use this dotted line if you are using a circuit
breaker.
OPTIONAL
“Air Where And When You Need It!” | ® |
|
Page 12