Grizzly G1183 owner manual Safety Instructions for Machinery

Page 10

SECTION 1: SAFETY

For Your Own Safety, Read Instruction Manual Before Operating this Machine

The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words intended to convey the level of impor- tance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures.

 

 

Indicates an imminently hazardous situation which, if not avoided,

 

 

 

 

WILL result in death or serious injury.

 

 

Indicates a potentially hazardous situation which, if not avoided,

 

 

 

 

COULd result in death or serious injury.

 

 

 

 

Indicates a potentially hazardous situation which, if not avoided,

 

 

 

 

MAY result in minor or moderate injury. It may also be used to alert

 

 

 

 

against unsafe practices.

NOTICE

This symbol is used to alert the user to useful information about

proper operation of the machine.

Safety Instructions for Machinery

OWNER’S MANUAL. Read and understand this owner’s manual BEFORE using machine. Untrained users can be seriously hurt.

EYE PROTECTION. Always wear ANSI-approved safety glasses or a face shield when operating or observing machinery to reduce the risk of eye injury or blindness from flying particles. Everyday eyeglasses are not approved safety glasses.

HAzARdOUS dUST. Dust created while using machinery may cause cancer, birth defects, or long-term respiratory damage. Be aware of dust hazards associated with each workpiece material, and always wear a NIOSH-approved respirator to reduce your risk.

WEARING PROPER APPAREL. Do not wear clothing, apparel, or jewelry that can become entangled in moving parts. Always tie back or cover long hair. Wear non-slip footwear to avoid accidental slips which could cause a loss of work- piece control.

HEARING PROTECTION. Always wear hear- ing protection when operating or observiing loud machinery. Extended exposure to this noise without hearing protection can cause permanent hearing loss.

MENTAL ALERTNESS. Be mentally alert when running machinery. Never operate under the influence of drugs or alcohol, when tired, or when distracted.

-8-

Model G1183/G1276 (Mfg. Since 3/10)

Page 9 Page 11
Image 10
Page 9 Page 11
Contents HEAVY-DUTY Combination Sander Page Table of Contents Introduction Manual Accuracy Contact InfoBasic Controls Belt Assembly Locking Cap ScrewSanding Disc Table Lock Knob 1 Machine Data Sheet Spindle Info Model G1276 Combination Sander 6 X 48 Belt Disc 1725 RPM 2500 FPM Safety Safety Instructions for MachineryUnattended OPERATION. Never­ leave­ Additional Safety for Combination Sanders Power Supply Grounding Requirements 50 ft Voltage ConversionMinimum Gauge Size 12 AWG To convert the machine toUnpacking SetupNeeded for Setup Description QtyInventory Shipping Inventory Figure QtyBefore cleaning, gather the following CleanupBasic steps for removing rust preventative Weight Load Site ConsiderationsMachine Base Workbench MountingAssemblyTo assemble the sander Sanding disc dust hose assembly Attached Table Gap Adjustment To adjust the table-to-sandpaper gapChecking Belt Tracking To check the belt trackingRecommended CFM at Dust CollectionTo connect the sander to the dust collection system Power Connection Test Run To test run the machineOperations Operation OverviewTable Tilt Table Tilt RangesSanding Belt Replacement Sandpaper SelectionDisc Sandpaper Disc Sanding To replace the disc sandpaperBelt Sanding Example of compound angle sandingSanding workpiece in horizontal Position Grit AccessoriesG2405-Safety Push Blocks PSA Aluminum Oxide Sanding DiscsG0710-Wall Hanging Dust Collector Pro-StikAbrasive Belt CleanersHeavy-Duty Birch Workbench H8361-60 x H8362-72 x Cleaning Sandpaper MaintenanceCleaning Protecting Machine ScheduleService TroubleshootingFrequently Tracking Roller & Platen Adjustment To adjust the roller and platenAdjustment Screws Locking Thumb Wheels Wiring Wiring Safety Instructions110V Wiring Diagram ON/OFF220V Wiring Diagram 104 Main Parts List DescriptionCompression Spring Warranty Card CommentsGrizzly INDUSTRIAL, INC BOX BELLINGHAM, WAWarranty and Returns Warranty and ReturnsOrder Hours a DAY
Related manuals
Manual 34 pages 63.26 Kb

G1183 specifications

The Grizzly G1183 and G1276 are two versatile tools that cater to woodworking enthusiasts and professionals alike. These machines stand out in the realm of high-performance woodworking equipment, delivering excellent functionality and precision.

The Grizzly G1183 is a heavy-duty drum sander designed for efficient sanding of wood surfaces. It features a unique two-drum design, which allows for increased material removal and a smoother finish in less time. The G1183 comes with a powerful 1.5 HP motor, providing ample torque for demanding sanding tasks. Its variable speed conveyor belt is a significant advantage, enabling users to adjust the speed according to their specific needs, which is crucial for achieving optimal results on different wood types. The machine’s adjustable height allows for sanding boards of various thicknesses, making it highly adaptable for a range of projects.

On the other hand, the Grizzly G1276 is a 12-inch planer that offers superb performance in thicknessing wood. It features a powerful 15 HP motor, capable of handling larger, tougher jobs effortlessly. This planer is equipped with an efficient dust collection system that helps maintain a cleaner workspace by minimizing wood chips and debris during operation. The G1276’s easy-to-read scale and adjustable depth control make it user-friendly, ensuring that even novice woodworkers can achieve professional-quality finishes.

Both machines are crafted with durability in mind. The cast iron construction of the G1183 and G1276 contributes to their stability and longevity, reducing vibrations during operation for a more consistent finish. Furthermore, the Grizzly lineup is known for incorporating advanced technologies, such as precision ground tables and high-quality bearings, ensuring that users get the best possible performance from their investment.

In conclusion, Grizzly G1183 and G1276 are excellent choices for anyone seeking reliability and efficiency in their woodworking projects. With their powerful motors, innovative features, and durable construction, these machines are designed to handle a variety of tasks while delivering outstanding results, making them invaluable assets in any workshop. Whether you’re a seasoned professional or just starting, the Grizzly G1183 and G1276 can elevate your woodworking experience, ensuring that you achieve impressive outcomes on every project.
Top Page Image Contents