Grizzly G1183 owner manual Sandpaper Selection, Sanding Belt Replacement

Page 28

Sandpaper Selection

Sanding a workpiece smooth requires using pro- gressively smaller grit sandpaper until the desired finish is attained.

The abrasiveness of sandpaper is designated in grit size—the larger the number, the finer the abrasive and the smaller the scratches. Thus, 100 grit is finer than 60 grit.

Typically, sanding operations start with a coarse grit and progressively work through the finer (larger number) grits until the desired finish is achieved. Avoid skipping a grit to achieve the best results.

Choosing the correct grits involve many factors, such as the workpiece condition, type/hardness, and the desired finish.

There are many types of sanding belts and discs to choose from. We recommend Aluminum Oxide for general workshop environments. Below is a chart that groups abrasives into different classes and shows which grits fall into each class.

Grit

Class

Usage

 

36

Extra Coarse

Rough sawn boards,

 

 

thickness

sanding,

 

 

and glue removal.

 

 

 

 

60

Coarse

Thickness

sanding

 

 

and glue removal.

 

 

 

 

80–100

Medium

Removing

planer

 

 

marks and initial fin-

 

 

ish sanding.

 

 

 

 

120–180

Fine

Finish sanding.

 

 

 

 

To ensure good sanding results, never skip more than 50 grit with each sandpaper change.

-26-

Sanding Belt

Replacement

The Model G1183/G1276 ships with a pre-installed 80-grit, 6" x 48" sanding belt.

Tools Needed

Qty

Phillips Head Screwdriver #2

1

To change the sanding belt:

 

1.DISCONNECT SANDER FROM POWER!

2.Loosen the four Phillips head screws that secure the left cover of the sanding belt hous- ing, then remove the cover.

3.Pull the spring-loaded quick-release tension lever forward to lower the top roller, then remove the sanding belt.

Note: Typically, sanding belts have a direc- tion arrow printed on the inside. Match this arrow with the direction arrow label on top of the sanding belt housing (see Figure 30). This will ensure that belt seams are correctly oriented for longer belt life.

Direction Label

Quick-Release

Tension Lever

Figure 30. Replacing sanding belt.

4.While still holding the tension lever down, center the new belt on the top roller, then release the tension lever.

5.Perform the Checking Belt Tracking on

Page 21 to ensure the new belt will track properly during operation.

Model G1183/G1276 (Mfg. Since 3/10)

Page 27 Page 29
Image 28
Page 27 Page 29
Contents HEAVY-DUTY Combination Sander Page Table of Contents Introduction Manual Accuracy Contact InfoBasic Controls Belt Assembly Locking Cap ScrewSanding Disc Table Lock Knob 1 Machine Data Sheet Spindle Info Model G1276 Combination Sander 6 X 48 Belt Disc 1725 RPM 2500 FPM Safety Safety Instructions for MachineryUnattended OPERATION. Never­ leave­ Additional Safety for Combination Sanders Power Supply Grounding Requirements Voltage Conversion Minimum Gauge Size 12 AWG50 ft To convert the machine toSetup Needed for SetupUnpacking Description QtyInventory Shipping Inventory Figure QtyBefore cleaning, gather the following CleanupBasic steps for removing rust preventative Weight Load Site ConsiderationsMachine Base Workbench MountingAssemblyTo assemble the sander Sanding disc dust hose assembly Attached Table Gap Adjustment To adjust the table-to-sandpaper gapChecking Belt Tracking To check the belt trackingRecommended CFM at Dust CollectionTo connect the sander to the dust collection system Power Connection Test Run To test run the machineOperations Operation OverviewTable Tilt Table Tilt RangesSanding Belt Replacement Sandpaper SelectionDisc Sandpaper Disc Sanding To replace the disc sandpaperBelt Sanding Example of compound angle sandingSanding workpiece in horizontal Position Accessories G2405-Safety Push BlocksGrit PSA Aluminum Oxide Sanding DiscsG0710-Wall Hanging Dust Collector Pro-StikAbrasive Belt CleanersHeavy-Duty Birch Workbench H8361-60 x H8362-72 x Maintenance Cleaning Protecting MachineCleaning Sandpaper ScheduleService TroubleshootingFrequently Tracking Roller & Platen Adjustment To adjust the roller and platenAdjustment Screws Locking Thumb Wheels Wiring Wiring Safety Instructions110V Wiring Diagram ON/OFF220V Wiring Diagram 104 Main Parts List DescriptionCompression Spring Warranty Card CommentsGrizzly INDUSTRIAL, INC BOX BELLINGHAM, WAWarranty and Returns Warranty and ReturnsOrder Hours a DAY
Related manuals
Manual 34 pages 63.26 Kb

G1183 specifications

The Grizzly G1183 and G1276 are two versatile tools that cater to woodworking enthusiasts and professionals alike. These machines stand out in the realm of high-performance woodworking equipment, delivering excellent functionality and precision.

The Grizzly G1183 is a heavy-duty drum sander designed for efficient sanding of wood surfaces. It features a unique two-drum design, which allows for increased material removal and a smoother finish in less time. The G1183 comes with a powerful 1.5 HP motor, providing ample torque for demanding sanding tasks. Its variable speed conveyor belt is a significant advantage, enabling users to adjust the speed according to their specific needs, which is crucial for achieving optimal results on different wood types. The machine’s adjustable height allows for sanding boards of various thicknesses, making it highly adaptable for a range of projects.

On the other hand, the Grizzly G1276 is a 12-inch planer that offers superb performance in thicknessing wood. It features a powerful 15 HP motor, capable of handling larger, tougher jobs effortlessly. This planer is equipped with an efficient dust collection system that helps maintain a cleaner workspace by minimizing wood chips and debris during operation. The G1276’s easy-to-read scale and adjustable depth control make it user-friendly, ensuring that even novice woodworkers can achieve professional-quality finishes.

Both machines are crafted with durability in mind. The cast iron construction of the G1183 and G1276 contributes to their stability and longevity, reducing vibrations during operation for a more consistent finish. Furthermore, the Grizzly lineup is known for incorporating advanced technologies, such as precision ground tables and high-quality bearings, ensuring that users get the best possible performance from their investment.

In conclusion, Grizzly G1183 and G1276 are excellent choices for anyone seeking reliability and efficiency in their woodworking projects. With their powerful motors, innovative features, and durable construction, these machines are designed to handle a variety of tasks while delivering outstanding results, making them invaluable assets in any workshop. Whether you’re a seasoned professional or just starting, the Grizzly G1183 and G1276 can elevate your woodworking experience, ensuring that you achieve impressive outcomes on every project.
Top Page Image Contents