3.Personal safety
a.Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operat- ing power tools may result in serious personal injury.
b.Use personal protective equip- ment. Always wear eye protec- tion. Safety equipment such as dust mask,
c.Prevent unintentional starting. Ensure the switch is in the off- position before connecting to power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
d.Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
e.Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
f.If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce
g. Only use safety equipment that has been approved by an appro- priate standards agency. Unap- proved safety equipment may not provide adequate protection. Eye protection must be
4.Power tool use and care
a.Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
b.Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be con- trolled with the switch is dangerous and must be repaired.
c.Disconnect the battery pack from the power tool before making any adjustments, changing accesso- ries, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool ac- cidentally.
d.Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to oper- ate the power tool. Power tools are dangerous in the hands of untrained users.
e.Maintain power tools. Check for misalignment or binding of mov- ing parts, breakage of parts and any other condition that may af- fect the power tool’s operation. If damaged, have the power tool re- paired before use. Many accidents are caused by poorly maintained power tools.
SKU 67046 | For technical questions, please call | Page 3 |