Heath Zenith SL-5210 manual Test and Adjustment, Specifications, Least Sensitive, Maximum Range

Page 3

TEST AND ADJUSTMENT

Turn on the circuit breaker and light switch.

The detector is less sensitive to motion directly towards it and more sensitive to across motion.

NOTE: Sensor has a 1 1/2 minute warm up period before it will detect motion. When first turned on or when switching modes, wait 1 1/2 minutes.

Motion

Motion

Turn the SENSITIVITY (SENS) control to the mid position and the ON-TIME control to the TEST position.

Sensor

Least Sensitive

Most Sensitive

ON-TIMESENS

10 5 1 TEST

 

 

 

 

 

 

 

MIN MAX

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Bottom of Sensor

Avoid aiming the control at:

Objects that change temperature rapidly, such as heating

 

vents and air conditioners. These heat sources could

 

cause false triggering.

Areas where pets or traffic may trigger the control.

Walk through the coverage area noting where you are when the lights turn on. Move the sensor head up, down, or sideways to change the coverage area.

Adjust the SENSITIVITY as needed.Too much sensitivity may increase false triggering.

Set the amount of TIME you want the lights to stay on after motion is detected (1, 5, or 10 minutes).

Aim Sensor Down for Short Coverage

Aim Sensor Higher for Long Coverage

Nearby large,light-colored objects reflecting daylight may

trigger the shut-off feature. Do not point other lights at the

sensor.

110°

5 ft.

 

60 ft.

Maximum Range

Maximum

 

Coverage Angle

SPECIFICATIONS

Range . . . . . . . . Up to 60 feet (varies with surround- ing temperature).

Sensing Angle. . . . . Up to 110°

Electrical Load. . . . . Up to 500 Watts Maximum, Incan-

descent

Power Requirements. . . 120 VAC, 60 Hz

Operating Modes. . . . TEST, AUTO and MANUAL OVER-

RIDE

Time Delay . . . . . . 1, 5, 10 minutes Sensitivity . . . . . . . Adjustable

HeathCo LLC reserves the right to discontinue products and to change specifications at any time without incurring any obligation to incorporate new features in products previously sold.

595-4991-07



Image 3
Contents Requirements FeaturesTypical Installation OperationImportant Installation Information InstallationTypical Wiring Switch Module In Junction BoxMaximum Range Test and AdjustmentSpecifications Least SensitiveTroubleshooting Guide No Service Parts Available for this ProductSymptom Possible Cause Instalación Típica FuncionamientoCaracterísticas RequisitosInformación Importante de Instalación Diagrama del AlambradoMódulo de Interruptor en Caja de Derivación Montar SensorAlcance Máximo Angulo de Cobertura Máxima Prueba Y AjusteEspecificaciones Lo menos sensibleGarantía Limitada a 5 Años Guia DE Investigacion DE AveriasServicio Técnico No hay piezas de servicio disponibles para este productoExigences Installation typeFonctionnement CaractéristiquesCouper lalimentation avant de travailler sur le câblage Réinstaller le luminaireRenseignements importants concernant l’installation Schéma de câblagePortée maximale Angle de Essai ET RéglageFiche Technique Le moins sensibleGarantie Limitée DE 5 ANS Service TechniqueGuide DE Dépannage Aucune pièce de rechange n’est disponible pour ce produit
Related manuals
Manual 12 pages 10.49 Kb

SL-5210 specifications

The Heath Zenith SL-5210 is a state-of-the-art motion-activated light fixture designed to enhance both security and convenience around residential properties. With its cutting-edge features, this outdoor security light has become a favorite among homeowners looking for reliable illumination and safety.

One of the standout characteristics of the SL-5210 is its advanced motion detection technology. Equipped with a passive infrared (PIR) sensor, this light can detect movement from up to 70 feet away, providing a broad coverage area. This capability allows it to monitor driveways, walkways, and other key points of entry, ensuring that any movement is promptly illuminated.

The SL-5210 also offers adjustable settings that allow users to customize the light’s sensitivity, duration, and the range of detection. Users can easily modify the time the light stays on after detecting motion, adjusting it from a short burst of light to several minutes, based on their needs. The sensitivity settings are also user-friendly, enabling adjustments based on environmental factors, ensuring that the light is triggered only when necessary.

Energy efficiency is another key feature of the Heath Zenith SL-5210. Utilizing LED bulbs, this light is designed to provide bright illumination while consuming minimal power. LEDs have a significantly longer lifespan compared to traditional incandescent bulbs, contributing to lower energy bills and reduced maintenance costs.

Durability is a significant consideration for any outdoor fixture, and the SL-5210 does not disappoint. Constructed with high-quality materials, it is weather-resistant, allowing it to withstand various outdoor elements, including rain, wind, and extreme temperatures. This rugged design ensures that it can provide reliable service year-round.

The installation process for the SL-5210 is straightforward, as it comes with all necessary hardware and a clear installation guide. This accessibility empowers homeowners to set up the security light with ease, enhancing the overall user experience.

In summary, the Heath Zenith SL-5210 motion-activated light fixture combines advanced motion detection technology, energy efficiency, customizability, and robust durability. It is an ideal solution for enhancing residential security while providing reliable illumination for outdoor areas. Homeowners seeking a dependable outdoor lighting solution will find that the SL-5210 meets and exceeds their expectations.