Wire the Light Control, Black to Black

❒ Drill out the holes if needed to mount the backplate to the junction box.

Wire the Light Control

WARNING: Turn power off at circuit breaker or fuse.

❒Remove the existing light fixture.

❒Strip about 5/8" (16 mm) insulation from the existing junction box wiring.

❒Route the light control’s wires through the large hole in the gasket.

❒Twist the junction box wires and fixture wires together as shown. Secure with a wire connector.

Black to Black

White to White

Cover Plate Gasket

Junction box ground wire to green ground wire on fixture.

Mount the Light Control

For proper operation and safety, the light fixture must be above the sensor.

❒Align the light control cover plate and cover plate gasket and the junction box. Insert and tighten the mounting screws.

❒If not installed on a weatherproof box or if an adaptor plate is used, caulk the wall plate and mounting surface with silicone weather sealant.

RIGHTWRONG

The halogen light must be mounted horizontally (+/- 4°).

Bulb Installation And Relamping

❒When re-lamping, turn power off and let the fixture cool.

CAUTION to avoid fire or burn hazards:

•Allow fixture to cool before touching. The bulb and fixture operate at high temperatures.

•Keepfixtureatleast2"(51mm)fromcombustiblemateri- als. Do not aim at objects closer than 3 feet (1 m).

•Re-lamp with type T 300W (or less) halogen 120 VAC lamp only.

❒Remove glass cover and remove the old bulb by pushing the bulb towards the right until the left side of the bulb is clear of the left socket.

❒To insert the new bulb, push the bulb into the right socket so the bulb fits completely into the left socket.

❒Check that the bulb is seated properly.

❒Re-install the glass cover.

For under eave installation, the sensor head must be rotated as shown in the next two steps for proper operation and to avoid the risk of electrical shock.

For eave mount only:

❒Rotate the sensor head towards the clamp screw joint.

Controls

Clamp Screw

❒Then rotate the sensor head clockwise 180° so the controls face down.

Controls

If the sensor pops out of the ball joint, loosen the clamp screw and push the sensor back into the ball joint. Tighten the clamp screw when done.

595-5496-07

SL-5309 specifications

The Heath Zenith SL-5309 is an innovative motion sensor security light designed to enhance outdoor safety and convenience. This smart lighting solution combines advanced technology with user-friendly features, making it an ideal addition to residential properties.

One of the standout features of the SL-5309 is its dual-brightness functionality. It can emit a soft glow during low-light conditions, activating to full brightness when motion is detected. This not only conserves energy but also provides users with a welcoming light that automatically intensifies when needed, ensuring safety without being overly obtrusive.

The motion sensor capabilities of the SL-5309 are powered by passive infrared (PIR) technology, which allows the device to detect movement within a specified range. The adjustable detection settings enable users to customize the sensor's sensitivity and the distance at which it responds to motion, providing flexibility based on individual requirements and outdoor layouts. With a detection range of approximately 180 degrees and up to 30 feet, the SL-5309 ensures a broad coverage area, enhancing the security of homes and properties.

Another notable characteristic of the Heath Zenith SL-5309 is its weather-resistant design. Made with durable materials, this outdoor light is built to withstand various environmental conditions, including rain, snow, and extreme temperatures. Its robust construction ensures long-lasting performance, making it a reliable choice for outdoor lighting.

Installation of the SL-5309 is straightforward, as it features a simple mounting system that allows users to secure the light in various outdoor locations, such as driveways, patios, or entryways. The product comes with necessary hardware and a user-friendly manual, ensuring a hassle-free setup process.

Additionally, the Heath Zenith SL-5309 incorporates an energy-efficient LED bulb that not only offers bright illumination but also reduces power consumption compared to traditional lighting sources. LED technology promotes longevity and decreases the need for frequent bulb replacements, making the SL-5309 an eco-friendly choice.

Overall, the Heath Zenith SL-5309 is a versatile and efficient outdoor lighting solution. With its intelligent motion sensing, adjustable settings, weather-resistant design, and energy-efficient LED, this security light enhances both safety and convenience for homeowners. Whether illuminating dark pathways or providing security after dark, the SL-5309 stands out as a reliable and stylish addition to any outdoor space.