Compact Fluorescent Dusk-to-
Dawn 42 Watt Security Light
Item | Model |
135931 |
Questions or problems? Before returning to your retailer, call our technical service department at
PACKAGE CONTENTS
• | Security light | • | Bulb |
• | Wire connectors | • | 1/2" NPT coupler |
• | 1/2" NPT nut | • | Lag bolts (x3) |
• | Mounting template |
|
|
INSTALLATION INSTRUCTIONS
Estimated Installation Time: 1 hour
Items needed for installation (not included):
• Phillips and flathead screwdrivers
• | Pliers | • | Wire strippers/cutters |
• | Safety glasses | • | Silicone caulk |
• | Ladder | • | Black tape |
• | Conduit fitting |
|
|
Additional item needed for junction box installation (not included):
• Junction box cover with threaded hole (1/2" NPT)
READ ALL INSTRUCTIONS CAREFULLY BEFORE
BEGINNING INSTALLATION.
NOTE: All wiring must be run in accordance with the National Electrical Code (Canadian Electrical Code in Canada) through conduit or another acceptable means. Contact a qualified electrician if there is any question as to the suit- ability of the system.
Lamp in Fixture Contains Mercury. Dispose According to Local, State, or Federal Laws.
Installation of Diffuser
Note: It is recommended to install the diffuser before mounting fixture to wall or junction box.
1.Place fixture upside down on a solid surface.
2.Remove diffuser locking screw from fixture (see Figure 1).
3.Align the notches in the diffuser with the tabs on the fixture and place the diffuser on the fixture (see Figure 1).
4.Rotate the diffuser clockwise until the diffuser stops (see Figure 1).
5.Install locking screw removed in step 2 (see Figure 1).
Diffuser
Diffuser
Locking
Screw
Diffuser Notch
Fixture Tab
Fixture
Figure 1
© 2008 HeathCo LLC |
|