Default Settings & Facts
The following lists the default settings of your NetComm ADSL Modem Router.
Note: It is highly recommended that you enable security settings in the router before connecting your router to your network.
Router
LAN IP: | 192.168.1.1 |
Username: | <none> |
Password: | admin |
WAN port: | ADSL only (built inADSL modem) |
Resetting
While using or installing your NetComm ADSL Modem Router you may need to utilise the reset feature. There are two types of reset:
Soft
A soft reset will restart the unit and reconnect to the internet using the settings stored previously, none of your settings are deleted. To perform a soft reset briefly press the reset button on the back of the unit.
Hard
A hard reset will return your unit to its factory default setting, meaning that you will loose all configurations and logs set/stored previously. To perform a hard reset press and hold in the reset button on the back of the unit for 10 seconds.
Power
Ensure that you only use the Power Adaptor supplied (5V DC, 3amps, Center pole positive) with your NetComm ADSL Modem Router.
Rev.1 - YML632 | www.netcomm.com.au |
ADSL Modem Router | Page 3 |