NetComm NB3300 manual Administration Settings

Page 32

4-7 Administration Settings

This feature allows the administrator to manage the NetComm ADSL Modem Router by setting certain parameters. For security reasons, it is strongly recommended that you set a Password and SNMP communities so that only authorized persons are able to manage your NetComm ADSL Modem Router. If the “Password” is left blank, all users on your network can access the router simply by entering the unit’s IP Address into their web browser’s location window.

■Firmware Version This field shows the installed version of the firmware.

■Administrator Password Enter the password you want to use into the “Password Change” field and re-enter it into the “Password Confirm” field for confirmation. Be sure that the password is less than 64 characters long and without any spaces.

■WAN MAC Change The WAN MAC address can be changed from the original values if necessary. Some ISPs require users to change the WAN MAC address to a registered one when users change their access equipment.

■External Admin Check “Enable” to allow you to configure the NetComm ADSL Modem Router from WAN side. To access the setting page from external side, enter “http://<WAN IP Address>:8080” into the web browser address column and press the “Enter” key.

■MTU Check “Enable” if you want to set the limitation of maximum packet size incoming and outgoing the router. Enter the maximum packet size you wish to set in the “Size” column. This can assist with the transmission of emails with attachments, etc.

■Reset Device Select “Yes” if you want to clear connections, reboot, and re-initialize the unit without affecting any of your configuration setting.

■Factory Defaults Select “Yes” if you want to return all the router’s current settings to their factory default settings.

Note: Do not restore to the factory defaults unless it is absolutely necessary.

Click “Apply” to make any changes.

www.netcomm.com.au

Rev.1 - YML632

Page 32

ADSL Modem Router

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Page Contents Power Default Settings & FactsResetting One page setup for most Adsl services NetComm Adsl Modem Router Quick StartRev.1 YML632 Adsl Modem Router Introduction Hardware Installation & Setup Internet AccessMacintosh Setup Trouble ShootingWhat is xDSL Contents of the NetComm Adsl Modem Router PackageFeatures of the NetComm Adsl Modem Router Getting to know your NetComm Adsl Modem RouterRev.1 YML632 Adsl Modem Router Hardware Installation & Setup Rear Panel & ConnectionsFront Panel LEDs DiagWhat is a Micro filter for? System Requirements and Setup Installing the TCP/IP Protocol in WindowsRev.1 YML632 Rev.1 YML632 Adsl Modem Router Fixed IP Addresses Configuration Rev.1 YML632 Adsl Modem Router Internet Access Prepare your network informationWeb-based User Interface Initial Configuration Setup WAN Connection TypeGateway using LLC Encaps. Dynamic IP Gateway using LLC Encaps. Static IPGateway using Classical IP Gateway using PppoeGateway using Pppoa Router using Classical IP Modem using LLC EncapsDhcp Configuration Access ControlIP Access Setting Advanced ApplicationsURL Access Settings Private MAC Filter Port Forwarding Settings Special Application Application Protocol Port RangeDynamic Routing Click Apply after making any changesStatic Routing Administration Settings Status Monitor DMZ Host 10 LogVPN Passthrough Macintosh Setup Hardware Connections Computer Network ConfigurationDynamic IP Addressing using Dhcp Server Manual Configuration of Fixed IP AddressesNetComm Adsl Modem Router Configuration Adding NetComm Adsl Modem Router to an Existing NetworkTrouble Shooting HardwareCannot access my ISP’s home page, why? Get a time out error when I enter a URL or IP addressClient Side Computers Can’t browse the Internet via the NetComm Adsl Modem RouterDoes the NetComm Adsl Modem Router support 100Mb Ethernet? Appendix a Frequently Asked QuestionsWhat is NAT and what is it used for? Does the NetComm Adsl Modem Router series support IPsec? Can Internet users access LAN computers?When should I use DMZ host? Interface Appendix B Technical SpecificationsStandards Compliance Appendix C Glossary Ethernet FirewallInternet IntranetNetwork Protocol PPPoEProtocol RoamingContact Information Product WarrantyAppendix D Registering your NetComm Product Limitations of Warranty

NB3300 specifications

The NetComm NB3300 is a powerful 4G LTE router designed to deliver seamless internet connectivity in various environments, from homes to small businesses and remote areas. Boasting a compact design, this device combines advanced technology with user-friendly features to ensure optimal performance and reliability.

One of the standout features of the NB3300 is its support for 4G LTE networks, which allows users to experience high-speed internet access with download speeds reaching up to 150 Mbps and upload speeds up to 50 Mbps. This capability makes it suitable for bandwidth-intensive applications such as streaming, online gaming, and video conferencing, ensuring smooth and efficient online interactions.

The NB3300 is equipped with a robust Wi-Fi system, supporting dual-band wireless connectivity. With both 2.4 GHz and 5 GHz frequency bands, users can enjoy flexible and reliable wireless connections. The dual-band feature minimizes interference, enabling multiple devices to connect simultaneously without compromising speed or performance. This is particularly beneficial in households or offices with numerous smart devices.

Security is a top priority with the NB3300, which comes with multiple built-in security protocols. These include WPA2 encryption and a robust firewall, ensuring that users' data and privacy remain protected while browsing the internet. Additionally, the router supports VPN pass-through, allowing secure remote access for users who require a secure connection to their company networks.

The device is also designed for convenience and ease of use. Its user-friendly interface allows for quick and simple setup, enabling users to get connected in a matter of minutes. Furthermore, the NB3300 features multiple Ethernet ports, enabling wired connections for devices that benefit from a stable and fast connection, such as gaming consoles and desktop computers.

Another noteworthy characteristic of the NetComm NB3300 is its versatility in powering options. It can be powered through AC, making it suitable for stationary use, or via USB for portability, allowing users to take their internet connection on the go.

In summary, the NetComm NB3300 is an all-in-one 4G LTE router that meets the demands of modern connectivity. Its blend of high-speed capabilities, security features, and ease of use makes it a strong contender for those seeking reliable internet solutions in various settings. Whether at home, in the office, or on the move, the NB3300 is poised to deliver exceptional performance and connectivity.
Top Page Image Contents