Sunfire HRS-SAT4BIP user manual Installation, Tools required, Preliminary steps

Page 8

Installation

Read the details on page 6 to help determine the best position for your loudspeakers.

The loudspeakers can be wall- mounted, or simply placed on shelves or cabinets

To wall-mount the loudspeakers, please follow the instructions below.

Tools required:

Phillips screwdriver

Pencil or other marker

Electric drill and 5/16" drill bit

Level

Safety glasses

Step ladder if needed

Electronic stud finder

Wood screws and dry wall anchors with screws are supplied

Preliminary steps:

Clear the area where you are going to work, so it will be safe.

Make sure there is no wiring, or gas or water pipes behind the wall where you are going to drill!

Temporarily remove any wall- mounted flat screen display if you will be working close to it.

We recommend mounting the loud- speakers into a wall stud.

We recommend that the loudspeak- ers are mounted horizontally, al- though vertical mounting is offered as an option.

If you have to mount the loud- speakers onto a masonry wall, we recommend that you consult with your hardware supplier to buy suit- able masonry hardware.

The HRS-SAT4BIP weighs 7.0 lb.

(3.2 kg). You should allow a good safety margin when mounting. If in doubt, please contact your Sunfire dealer for professional installation.

User's Manual

Image 8
Contents High Resolution Series Surround Loudspeaker Important Safety Instructions ContentsCare Introduction FeaturesUnpacking Cabinet and baffle OverviewTweeterWoofers Features Mounting BracketsBinding Posts GrillesConfiguration Loudspeaker LocationsUsing a subwoofer Subwoofer LocationPreliminary steps InstallationTools required Wall-mounting HRS-SAT4BIPSpecifications Poor or no sound TroubleshootingService Assistance HRS-SAT4BIP