Solid State Logic 82S6XL010D owner manual Introduction, Out of Warranty Repairs

Page 7

Introduction

1.0 Introduction

The XLogic Multichannel Compressor is a 2U rack-mounting six-channel compressor. It utilises classic SSL Centre Section compressor design elements within a SuperAnalogue design topology. This brings the dual benefits of spectacular surround audio performance with a universally acclaimed compressor characteristic.

The unit contains two separate compressors. Normally the upper one controls the left, centre, right and surround channels and the lower one the LFE channel, but the DUAL STEREO switch reassigns the controls so that the lower set control the surround channels and the upper set control left, centre, right and LFE channels.

The SIDE CHAIN TRIM controls allow different thresholds to be set for left/right, centre, surround and LFE channels. The centre and surround ISO switches bypass the respective compressor channels completely.

A six channel Master Fader and Autofade control provide overall level control of the mix

The object of this manual is to provide purchasers of the XLogic Multichannel Compressor unit with information in the following areas:

Operation of the unit

Safety considerations

Installation requirement

Electrical connections and cabling

Connector pin-outs

Specifications and physical dimensions

Warranty

The warranty period for this unit is 12 months from date of purchase.

In Warranty Repairs

In the event of a fault during the warranty period the unit must be returned to your local distributor who will arrange for it to be shipped to Solid State Logic for repair. All units should be shipped to Solid State Logic in their original packaging. Solid State Logic can not be held responsible for any damage caused by shipping units in other packaging. In such cases Solid State Logic will return the unit in a suitable box, which you will be charged for. Please do not send manuals, power leads or any other cables - Solid State Logic can not guarantee to return them to you. Please also note that warranty returns will only be accepted as such if accompanied by a copy of the receipt or other proof of purchase.

Out of Warranty Repairs

In the event of a fault after the warranty period has expired, return the unit in its original packaging to your local distributor for shipment to Solid State Logic. You will be charged for the time spent on the repair (at Solid State Logic's current repair rate) plus the cost of parts and shipping.

Page 3

Image 7
Contents Multichannel Compressor Page Solid State Logic Solid State Logic Contents XLogic Multichannel Compressor rear XLogic Multichannel Compressor frontIntroduction WarrantyWarranty Repairs Out of Warranty RepairsDefinitions Safety considerationsElectrical Safety Warning InstallationFCC Certification Mains Supply and PhasesMains Isolation and Over-Current Protection CE CertificationConnection InstallationVoltage Selection MountingOperation Side Chain Adjust SectionCompressor Controls Fader Section Mode SectionAppendix a Internal links and fuses Appendix B Connector DetailsAppendix C Performance Specification Side Chain Trim Calibration Side Chain Gain AdjustmentAppendix D Calibration Information DC CalibrationDistortion Null VCA Gain AdjustInput Measure Adjust Input AdjustAppendix F Environmental Specification Appendix E Physical specification