Connections between a D5XH chassis in a Stand-Alone configuration and D5XH Digital Audio Routers involve Cat-5 patch cables routed between the units. All cables are included with the D5XH. Connections are required for:
•EXPANSION OUT/EXPANSION IN
•SOURCE LOOP OUT/SOURCE LOOP IN
EXPANSION OUT/EXPANSION IN
Simply connect a Cat-5 patch cable from the D5XH’s EXPANSION OUT port to the first D5XH’s EXPANSION IN port. For multiple D5XH units, connect a Cat-5 patch cable from the first D5XH’s EXPANSION OUT port to the next D5XH’s EXPANSION IN port, and so on. See Figure 3-18 for details.
SOURCE LOOP OUT/SOURCE LOOP IN
Connect a Cat-5 patch cable from each SOURCE LOOP OUT of the D5XH to each corresponding SOURCE LOOP IN on the next D5XH and so on. See Figure 3-18 for details.
D5IP
Source
Wall Plate
X4
Cat-5
D5XH Cat-5
D5XH
To Additional D5XH Chassis
Figure 3-18: System Expansion Connections