Global Machinery Company BJ600 instruction manual Additional safety rules for biscuit joiners

Page 5

c. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5. Service

a. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Additional safety rules for biscuit joiners

•Hold tool by insulated gripping surfaces when performing an operation where the cutting tools may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.

•Fully unwind cable drum extensions to avoid potential overheating.

•When an extension cable is required, you must ensure that it has the right ampere rating for your power tool and is in safe electrical condition.

•Ensure your mains supply voltage is the same as your tool rating plate voltage.

•If possible, always use clamps or a vice to hold your work.

•Always switch off before you put the biscuit joiner down.

•Ensure that the lighting is adequate.

•Keep the area free of tripping hazards.

•Do not let anyone under 18 years operate this tool.

•Only use accessory blades that are in good condition.

•Do not touch the blade after operation. It will be hot.

•Keep yours hands away from under the workpiece.

•Never use your hands to remove chips or waste close by the blade.

•Rags, cloths, cord, string and the like should never be left around the work area.

•Support the work properly.

•Periodically check that all nuts, bolts and other fixings are properly tightened.

•When using the tool, use safety equipment including safety glasses or shield, ear protection, and protective clothing including safety gloves. Wear a dust mask if the operation creates dust.

•If in doubt, do not plug in the tool.

•Using a power source with a voltage less than the nameplate rating is harmful to the motor.

Wear goggles

Wear earmuffs

Wear a breathing mask

The tool must be used only for its prescribed purpose. Any use other than those mentioned in this Manual will be considered a case of misuse. The user and not the manufacturer shall be liable for any damage or injury resulting from such cases of misuse.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Biscuit Joiner Contents Specifications Description of symbolsIntroduction Environmental protectionElectrical safety General safety rulesPower tool use and care Do not use the power tool if the switch does not turnWear goggles Wear earmuffs Wear a breathing mask Additional safety rules for biscuit joinersUnpacking Contents of cartonKnow your product Depth Setting Depth of Cut Adjusting the cutting depthOverview Biscuit No Width LengthFitting the height Bevel adjustment fence Adjusting the secondary handleAdjusting the bevel angle Adjusting the cutting heightTurning on and off Changing the bladeOperation overview Dust extractionOperation Making a cut Edge to EdgeMaking a mitre joint Making an edge to edge jointCleaning MaintenancePower cord maintenance Making a corner jointTrouble Problem Suggested remedy Trouble shootingPage GMC customer assist

BJ600 specifications

Global Machinery Company is a leader in the manufacturing and engineering of high-performance machinery, with a commitment to innovation and sustainable practices. One of its standout products is the BJ600, a cutting-edge machine designed for a variety of industrial applications. The BJ600 is characterized by its robust construction, advanced features, and efficiency, making it a preferred choice among professionals in multiple sectors.

One of the main features of the BJ600 is its high-powered engine, which delivers exceptional performance while maintaining energy efficiency. The engine utilizes advanced fuel injection technology, ensuring optimal combustion and reduced emissions, aligning with global sustainability efforts. This not only helps in lowering operational costs but also minimizes the environmental footprint of machinery operations.

The BJ600 is equipped with a state-of-the-art control system that enhances usability and precision. The user-friendly interface allows operators to easily monitor and adjust the machine's performance, facilitating seamless integration into existing workflows. Additionally, the control system offers real-time data analytics, giving users insights into machine performance and maintenance needs, thereby enhancing productivity.

This machine is also built to withstand the rigors of demanding work environments. The BJ600 features a heavy-duty frame and components that are resistant to wear and tear, ensuring longevity and reliability. Its design incorporates advanced materials that are both lightweight and durable, allowing for enhanced maneuverability without compromising strength.

In terms of safety, the BJ600 is outfitted with multiple safety features, including emergency stop controls, protective shielding, and advanced sensor technology. These features not only protect the operator but also ensure that the machine operates within safe parameters, significantly reducing the risk of accidents.

Another notable characteristic of the BJ600 is its versatility. It can be easily customized with various attachments and accessories, making it suitable for a wide range of applications, including construction, agriculture, and manufacturing. This adaptability ensures that the BJ600 can meet the specific needs of different industries, providing value and flexibility to its users.

In conclusion, the Global Machinery Company BJ600 stands out in the world of industrial machinery due to its powerful performance, innovative technologies, user-friendly features, and commitment to safety and efficiency. As industries continue to evolve, the BJ600 remains a reliable and adaptable solution for those seeking high-quality machinery.
Top Page Image Contents