Global Machinery Company BJ600 Adjusting the secondary handle, Adjusting the bevel angle

Adjusting the secondary handle

1.Using an Allen key loosen the set screw on each side of the handle (fig B).

B C

2.Position the handle to the desired position (fig C).

3.Tighten the 2 hex screws to secure the handle in position.

Fitting the height and	D
bevel adjustment fence

1.Attach the height and bevel adjustment fence to the main fence by sliding it over the top of the main fence (fig D).

Adjusting the bevel angle

The adjustable tilt feature allows slots to be cut on a bevelled edge.

1.Loosen the bevel adjustment knob (9) by rotating it in an anti-clockwise direction (fig E).

E F

2.Move the fence to the desired angle between 0° and 90° using the bevel scale (8) and pointer as

a guide (fig F).

3. Tighten the bevel adjustment

knob (9) to secure theG fence in position (fig G).

Adjusting the cutting height

The height of the fence can be adjusted to let you make biscuit slots at different depths down from the surface of the workpiece.

1.Ensure that the fence is set at 0°.

2.Position fence (7) to the desired height using the scale (10) on the main fence as a guide (fig H).

H I

3.Tighten the height adjustment knob (10) by rotating it in a clockwise direction to secure the fence in position (fig I).

Anti-slip rubber grips

Biscuit jointers tend to pull to the	J
right when making a cut. The
anti-slip rubber grips have been
provided to reduce this effect
and help keep the biscuit joiner
steady on the workpiece (fig J).

9