Grounding/Voltage Warning, Assembly | Harbor Freight Tools 31849

Grounding/Voltage Warning

Common household current is 110-120 volts. As long as the outlet used with the tool is rated from 110-120V there will be no complications using it with household receptacles. Plug the tool into a 110-120V properly grounded outlet protected by a 15-amp, dual element time delay or circuit breaker.

NEVER try to plug a 110-120V tool into a 220-240V circuit or serious complications and possible injury to the operator may occur. The plugs have different shapes to prevent this.

This tool has a three-prong plug. The third (round) prong is the ground. Cutting off the ground will result in a safety hazard and void the warranty.

If the outlet you are planning to use is the two-prong type, do not remove or alter the grounding prong in any manner. Use an adapter and always connect the grounding plug to a known grounding source. It is recommended that you have a qualified electrician replace the two-prong outlet with a properly grounded three- prong outlet.

Extension Cords

Your tool has a three-prong plug, therefore you must use a three-prong extension cord. Only use rounded jacket extension cords listed by the Underwriters Laboratories (UL). Improper use of extension cords may cause inefficient operation of your tool which can result in overheating. Be sure your extension cord is rated to allow sufficient current flow to the motor.

If you are using the tool outdoors, use an extension cord rated for outdoor use (signified by “WA” on the jacket).

The extension cord must have a minimum wire size depending on the amperage of the tool and the length of the extension cord. This size is determined by its AWG (American Wire Gauge) rating. The smaller the gauge, the greater the cable’s capacity. The amount of cords used does not matter: Total length determines the minimum AWG rating. Every cord must meet the AWG rating. Use the chart below to determine what AWG rating is required for your situation. Cord length is rated in feet. Harbor FreightTools can supply UL listed and outdoor rated cords in multiple AWG ratings if needed.

AWG RATING CHART

CORD LENGTH 25’		50’	75’	100’	125’	150’	175’	200’
AMPS	AWG	AWG	AWG	AWG	AWG	AWG	AWG	AWG
0-10.0	18	18	16	16	14	14	12	12
10.1-13.0	16	16	14	14	14	12	12	12
13.1-15	14	14	12	12	12	12	12	—-
15-18	14	12	12	12	12	12	—-	—-

DO NOT MODIFY YOUR PLUG IN ANY WAY. IF YOU HAVE ANY DOUBT, CALL A QUALIFIED ELECTRICIAN.

Assembly

Your Jointer will require complete assembly as indicated below. To assist you with assembly and operation please refer to the Operational Figures and to the Assembly Diagrams and Parts Lists located at the end of this manual.

Before assembling, remove all traces of the packing grease from the Jointer and wipe all parts thoroughly with a clean dry cloth. When cleaning do not use acetone, gasoline or paint thinner as these solvents are dangerous to you and may also cause damage to plastic and rubber parts. Apply a thin coating of automotive wax to any unpainted surfaces to prevent rust.

Caution!: Consider the weight of the components and take the necessary precautions when lifting. Assistance may be required during assembly.

#31849

Page 4

31849 specifications

Harbor Freight Tools is known for its vast array of quality tools at affordable prices, and one standout item from their lineup is the Harbor Freight Tools 31849. This item is designed for professionals and DIY enthusiasts alike, seeking efficiency and precision in their work.

The Harbor Freight Tools 31849 features a robust construction, ensuring durability and longevity even under heavy use. The tool is equipped with advanced materials that withstand wear and tear, making it a reliable option for various projects. Its ergonomic design enhances comfort, reducing fatigue during extended usage. This consideration for user comfort is a hallmark of Harbor Freight's commitment to quality.

One of the main characteristics of the 31849 is its versatility. This tool is engineered to handle a wide range of tasks, from heavy-duty jobs to fine, intricate work. The adjustable components allow users to fine-tune the tool to their specific needs, making it ideal for both general use and specialized tasks. This adaptability can significantly streamline workflows, saving time and effort.

Technologically, the Harbor Freight Tools 31849 incorporates innovations that improve its performance. Features such as integrated safety mechanisms enhance user protection, providing peace of mind during operation. The tool's design also emphasizes easy maintenance, allowing users to keep it in top condition with minimal effort. Routine upkeep is simplified, further extending the life of the tool.

Furthermore, the 31849 is lightweight and portable, making it convenient for those who need to transport their tools to different job sites. Its compact size doesn’t compromise its powerful performance; users will find it an excellent addition to their toolkit.

Additionally, Harbor Freight Tools prides itself on offering excellent customer support and warranty options, ensuring that customers have assistance if needed. This focus on customer satisfaction reinforces why many choose Harbor Freight for their tool needs.

In summary, the Harbor Freight Tools 31849 stands out for its durability, versatility, and user-centric design. With its advanced features and technologies, this tool proves to be an essential asset for any toolkit, appealing to both seasoned professionals and enthusiastic amateurs. Whether you’re tackling weekend projects at home or professionals assignments on the job, the 31849 is built to deliver reliable performance every time.