Parkside PHLG 2000-2 manual Operation / Cleaning, Changing the nozzle

Page 9

Operation / Cleaning

Use as free-standing unit / during cooling (see Fig. B, E):

jAlways set the device down upright on a level surface, this will allow

·you to have both hands free

·the device to cool

QChanging the nozzle

Warning! Too much heat causes paints and plastics to ignite.

CauTIOn! Do not inhale the resulting vapours.

Reflector nozzle 4 – for shaping plastic pipes or tubes (see Ill. B):

jPlace the reflector nozzle 4 on the outlet tube 3 .

jFill the pipe or tube with sand and ensure it is closed at both ends. This will prevent the pipe or tube from kinking.

jWarm the pipe evenly, in that you move it back and forth.

Protector nozzle 5 – for removing paint and varnish (see Ill. C):

jPlace the protector nozzle 5 on the outlet tube 3 .

jThe spatula shape of the nozzle ensures the air is properly directed. Use a separate spatula for removing paint or varnish.

Flat nozzle 6 – for detaching glues, softening paint (see Ill. D):

jPlace the flat nozzle 6 on the outlet tube 3 .

jDo not apply heat for too long a period, as burnt paint becomes much more difficult to remove. Many glues can be softened by warm- ing. Glued connections can then be detached and excess glue removed.

Reducing nozzle 7 – for welding plastic:

jPlace the reducer nozzle 7 on the outlet tube 3 .

jUse the reducing nozzle 7 for heat-shrinkable sleeves and film.

QFurther examples of uses in the house, car and garden

Defrosting water pipes:

Notice! It must not be used for thawing PVC pipes. Notice! It is often very difficult to tell the differ- ence between gas pipes and water pipes. If in doubt, ask a competent person.

Notice! Copper pipes are joined using tin solder and must not be heated above 200 °C.

jUse the reflector 4 to defrost water pipes.

Loosening a threaded connection:

jHeating the threaded connection carefully can often allow the connection to be released.

Removing weeds:

jThe heat dries out the weeds and micro- organisms.

Lighting barbecue charcoal:

Warning! Do not use methylated alcohol.

jCharcoal ignites in a few minutes.

Wax removal:

jYou can remove wax residues from skis / snow- board or from candle holders. Use the amount of care appropriate to the product.

QCleaning

Warning! Before carrying out work on the appliance, always remove the plug from the power socket.

jKeep the air inlet and outlet clean.

jUse a cloth to clean the housing. Use a soft cloth to clean the housing. Never use petrol, solvents or cleaning agents as these may attack the plastic.

10 GB/IE/CY

Image 9
Contents PHLG  Page Page Table of contents Introduction Features and equipmentHeat gun Phlg Included itemsWorkplace safety Introduction / General safety adviceElectrical safety Technical informationGeneral safety advice Personal safetyCareful handling and use of electrical power tools General safety advice / Operation Safety advice relating specifically to this devicePreparing the device for use Cleaning Operation / CleaningChanging the nozzle Further examples of uses in the house, car and gardenService Warranty Service / Warranty / DisposalDisposal Do not dispose of electric tools in the household wasteDeclaration of conformity / Producer Declaration of conformity / ProducerWe, Kompernaß GmbH, Burgstr

PHLG 2000-2 specifications

The Parkside PHLG 2000-2 is a powerful handheld heat gun designed for a variety of applications, catering to both DIY enthusiasts and professionals. This versatile tool is ideal for tasks such as paint stripping, soldering, and shrinking tubing, making it a valuable addition to any toolkit. With a robust design and user-friendly features, the PHLG 2000-2 stands out in the competitive market of heat guns.

One of the main features of the Parkside PHLG 2000-2 is its powerful 2000-watt motor, which provides an impressive output for rapid heating and efficient performance. The heat gun offers two different temperature settings, allowing users to choose between 350°C and 600°C, which makes it suitable for a wide range of applications. The adjustable airflow rate further enhances its versatility, enabling users to control the intensity of the heat according to the specific requirements of their projects.

Safety is a priority in the design of the PHLG 2000-2. It features an integrated overheat protection system that automatically shuts off the heat gun when it reaches excessive temperatures, preventing potential damage and ensuring user safety. The ergonomic handle is designed for comfort and ease of use during prolonged periods of operation, reducing fatigue and improving handling.

The PHLG 2000-2 is equipped with a variety of practical attachments including a deflector nozzle and a reflector nozzle, which enhance the tool's capabilities. These nozzles allow for precise heat application, making it easier to work on intricate tasks. The heat gun also comes with a sturdy stand that allows for hands-free operation, providing users with the added convenience of multitasking.

In terms of portability, the Parkside PHLG 2000-2 is designed with a lightweight body, making it easy to maneuver and carry. Its durable construction ensures longevity, and it is suitable for both indoor and outdoor use. Whether you are tackling a home renovation project or working on professional repairs, the PHLG 2000-2 delivers reliability and excellent performance.

Overall, the Parkside PHLG 2000-2 is an exceptional heat gun that combines power, safety, and versatility. With its impressive specifications and thoughtful design, it has earned a reputation as a go-to tool for various heating applications, making it a must-have for anyone looking to achieve professional results with ease.