SPECIFICATIONS
Model | TW0200 | ||
|
|
| |
Capacities | Standard bolt | M10 - M16 (3/8” - 5/8”) | |
|
| ||
High tensile bolt | M10 - M12 (3/8” - 1/2”) | ||
| |||
|
|
| |
Square drive | 12.7 mm (1/2”) | ||
|
| ||
No load speed (RPM) |
| ||
|
| ||
Impacts per minute | |||
|
| ||
Max. fastening torque | 200 N.m (150ft•lbs) | ||
|
| ||
Overall length | 251 mm | ||
|
| ||
Net weight | 2.1 kg (4.6lbs) | ||
|
|
| |
•Manufacturer reserves the right to change specifications without notice.
•Specifications may differ from country to country.
GENERAL SAFETY RULES |
(For All Tools)
WARNING:
Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
Work Area
1.Keep your work area clean and well lit. Cluttered benches and dark areas invite acci- dents.
2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
3.Keep bystanders, children, and visitors away while operating a power tool. Dis- tractions can cause you to lose control.
Electrical Safety
4.Double insulated tools are equipped with a polarized plug (one blade is wider than the other.) This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it
2