DeWalt DCD775KLR instruction manual Screwdriver Operation Fig, Repairs, Cleaning, Guarantee

Page 13

Screwdriver Operation (Fig. 6)

1.Select the desired speed/torque range using the dual range gear selector to match the speed and torque of the planned operation.

2.Turn the torque adjustment collar to the desired position. Lower numbers indicate lower torque settings; higher numbers indicate higher torque settings.

3.Insert the desired fastener accessory into the chuck as you would any drill bit.

FIG. 6

C

SCREWDRIVING

CHARGER CLEANING INSTRUCTIONS

WARNING: Shock hazard. Disconnect the charger from the AC outlet before cleaning. Dirt and grease may be removed from the exterior of the charger using a cloth or soft non-metallic brush. Do not use water or any cleaning solutions.

Repairs

This charger is not user serviceable. There are no user serviceable parts inside the charger.

To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (including brush inspection and replacement) should be performed by certified service centers or other qualified service organizations, always using identical replacement parts.

ACCESSORIES

4.Make some practice runs in scrap or on unseen areas to determine the proper position of the clutch collar.

5.Always start with lower torque settings, then advance to higher torque settings to avoid damage to the workpiece or fastener.

MAINTENANCE

WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect tool from power source before making any adjustments or removing/ installing attachments or accessories.

Cleaning

WARNING: Blow dirt and dust out of all air vents with dry air at least once a week. Wear proper ANSI Z87.1 (CAN/CSA Z94.3) eye protection and proper NIOSH/OSHA/ MSHA respiratory protection when performing this.

WARNING: Never use solvents or other harsh chemicals for cleaning the non- metallic parts of the tool. These chemicals may weaken the plastic materials used in these parts. Use a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

WARNING: Since accessories, other than those offered by DEWALT, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only DEWALT, recommended accessories should be used with this product.

Recommended accessories for use with your tool are available at extra cost from your local service center. If you need any assistance in locating any accessory, please contact DEWALT Industrial Tool Co., 20 Fletcher Road, Mooroolbark, VIC 3138 Australia or call 1800 654 155 or (NZ) 0800 339258.

Guarantee

Applicable to hand held Power Tools, Lasers and Nailers.

Three Year Limited Warranty

DEWALT will repair, without charge, any defects due to faulty materials or workmanship for three years from the date of purchase. Please return the complete unit, transportation prepaid, to any DEWALT Service Centre, or any authorised service station.

For warranty repair information, call (AUS) 1800 654 155 or (NZ) 0800 339258. This warranty does not apply to

• Accessories

11

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Page Page Work Area Safety Definitions Safety GuidelinesElectrical Safety Personal SafetyPower Tool USE and Care Electrical SafetyBattery Tool USE and Care ServiceExtension Cords Drill/Driver/Hammerdrill Safety WarningsRead ALL Instructions Important Safety Instructions for All Battery PacksSpecific Safety Instructions for Lithium ION LI-ION Important Safety Instructions for all Battery ChargersRbrc Seal Charging Procedure Using Automatic Tune-Up ModeIndicator Light Operation ChargersImportant Charging Notes Charge IndicatorsStorage Recommendations Save These Instructions for Future USE Installing and Removing the Battery PackTorque Adjustment Collar Fig Variable Speed Switch FigForward/Reverse Control Button Fig Dual Range Gearing FigHammerdrill Operation Fig Guarantee CleaningThree Year Limited Warranty Screwdriver Operation FigDAY no Satisfaction Guarantee Free ONE Year Service ContractPage Ewalt Industrial Tool Co

DCD775KLR specifications

The DeWalt DCD775KLR is a highly regarded cordless drill driver that combines power, versatility, and convenience, making it an excellent choice for both professionals and DIY enthusiasts. This tool is part of DeWalt's reliable 18V lineup, designed to deliver optimal performance for a wide range of tasks.

One of the standout features of the DCD775KLR is its compact and lightweight design. Weighing in at just 4.7 pounds, this drill is easy to maneuver, reducing operator fatigue during extended use. Its ergonomic handle also provides a comfortable grip, which enhances control and precision while working.

The DCD775KLR is equipped with a high-performance, 2-speed transmission that allows users to switch between speeds of 0-450 RPM for low-speed applications and 0-1500 RPM for high-speed tasks. This versatility makes it suitable for a variety of materials, including wood, metal, and plastic. The drill's variable speed trigger further provides greater control for precise applications.

Another impressive characteristic of the DCD775KLR is its powerful 1/2-inch keyless chuck. This feature allows for quick and easy bit changes without the need for additional tools, maximizing efficiency on the job site. The drill is also capable of delivering up to 350 units watts out (UWO), enabling it to handle tough drilling and fastening tasks with ease.

The DCD775KLR features integrated LED lights that illuminate work areas, providing visibility in dimly lit spaces. This is particularly useful for working in attics, basements, or during evening projects. Moreover, the drill is designed with an all-metal transmission for enhanced durability and longevity, ensuring it stands up to heavy use.

Battery life is critical in a cordless drill, and the DCD775KLR does not disappoint. It comes with two compact 1.5 Ah lithium-ion batteries that maintain consistent power and charge quickly, minimizing downtime. The compatibility with other 18V DeWalt batteries adds to the tool's convenience.

In summary, the DeWalt DCD775KLR stands out with its lightweight design, powerful performance, 2-speed transmission, keyless chuck, integrated LED light, and exceptional battery life. This drill driver embodies the robust construction and innovative technology that DeWalt is known for, making it a reliable choice for any task at hand. Whether you’re a seasoned professional or tackling home improvement projects, the DCD775KLR is engineered to provide the performance and durability needed to get the job done.
Top Page Image Contents