Definitions Safety Guidelines, Work Area Safety

Definitions: Safety Guidelines

The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

NOTICE: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY DEWALT TOOL, CALL US AT: 1800 654 155 (Aust) or 0800 339258 (NZ).

SAFETY INSTRUCTIONS FOR POWER TOOLS

When using power tools, always observe the safety regulations applicable in your country to reduce the risk of fire, electric shock and personal injury. Read the following safety instructions before attempting to operate this product. Keep these instructions in a safe place.

WARNING: To reduce the risk of injury, read the instruction manual.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING! Read all safety warnings and all instructions Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

SAVE THESE INSTRUCTIONS

The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1)WORK AREA SAFETY

a)Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b)Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c)Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2)ELECTRICAL SAFETY

a)Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

b)Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

c)Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

d)Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

e)When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

f)If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3)PERSONAL SAFETY

a)Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

b)Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

DCD775KLR specifications

The DeWalt DCD775KLR is a highly regarded cordless drill driver that combines power, versatility, and convenience, making it an excellent choice for both professionals and DIY enthusiasts. This tool is part of DeWalt's reliable 18V lineup, designed to deliver optimal performance for a wide range of tasks.

One of the standout features of the DCD775KLR is its compact and lightweight design. Weighing in at just 4.7 pounds, this drill is easy to maneuver, reducing operator fatigue during extended use. Its ergonomic handle also provides a comfortable grip, which enhances control and precision while working.

The DCD775KLR is equipped with a high-performance, 2-speed transmission that allows users to switch between speeds of 0-450 RPM for low-speed applications and 0-1500 RPM for high-speed tasks. This versatility makes it suitable for a variety of materials, including wood, metal, and plastic. The drill's variable speed trigger further provides greater control for precise applications.

Another impressive characteristic of the DCD775KLR is its powerful 1/2-inch keyless chuck. This feature allows for quick and easy bit changes without the need for additional tools, maximizing efficiency on the job site. The drill is also capable of delivering up to 350 units watts out (UWO), enabling it to handle tough drilling and fastening tasks with ease.

The DCD775KLR features integrated LED lights that illuminate work areas, providing visibility in dimly lit spaces. This is particularly useful for working in attics, basements, or during evening projects. Moreover, the drill is designed with an all-metal transmission for enhanced durability and longevity, ensuring it stands up to heavy use.

Battery life is critical in a cordless drill, and the DCD775KLR does not disappoint. It comes with two compact 1.5 Ah lithium-ion batteries that maintain consistent power and charge quickly, minimizing downtime. The compatibility with other 18V DeWalt batteries adds to the tool's convenience.

In summary, the DeWalt DCD775KLR stands out with its lightweight design, powerful performance, 2-speed transmission, keyless chuck, integrated LED light, and exceptional battery life. This drill driver embodies the robust construction and innovative technology that DeWalt is known for, making it a reliable choice for any task at hand. Whether you’re a seasoned professional or tackling home improvement projects, the DCD775KLR is engineered to provide the performance and durability needed to get the job done.