Personal safety
1.Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
2.Use personal protective equipment.
Always wear eye protection. Safety equipment such as dust mask,
3.Prevent unintentional starting. Ensure the switch is in the off‑position before connecting the battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
4.Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
5.Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
6.Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
7.Only use safety equipment that has been approved by an appropriate standards agency.
Unapproved safety equipment may not provide adequate protection. Eye protection must be ANSI‑approved and breathing protection must be NIOSH‑approved for the
specific hazards in the work area.
SAFETY
SETUP
Power tool use and care
1. | Do not force the power tool. Use the correct | 5. | Maintain power tools. Check for misalignment |
| power tool for your application. The correct |
| or binding of moving parts, breakage of parts |
| power tool will do the job better and safer |
| and any other condition that may affect the |
| at the rate for which it was designed. |
| power tool’s operation. If damaged, have the |
2. | Do not use the power tool if the |
| power tool repaired before use. Many accidents |
| are caused by poorly maintained power tools. | ||
| switch does not turn it on and off. | 6. | Keep cutting tools sharp and clean. Properly |
| Any power tool that cannot be controlled with the | ||
| switch is dangerous and must be repaired. |
| maintained cutting tools with sharp cutting edges |
3. | Disconnect the battery pack from the |
| are less likely to bind and are easier to control. |
|
| ||
| power tool before making any adjustments, | 7. Use the power tool, accessories and tool bits | |
| changing accessories, or storing power tools. |
| etc. in accordance with these instructions, |
| Such preventive safety measures reduce the |
| taking into account the working conditions |
| risk of starting the power tool accidentally. |
| and the work to be performed. Use of the |
4. | Store idle power tools out of the reach of |
| power tool for operations different from those |
| intended could result in a hazardous situation. | ||
| children and do not allow persons unfamiliar |
|
|
with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
OPERATION
MAINTENANCE
Item 68853 | For technical questions, please call | Page 3 |