SYMBOLOGY
V~
A
Double Insulated
Canadian Standards Association
Underwriters
Laboratories, Inc.
Volts Alternating Current
Amperes
no xxxx/min. | No Load Revolutions |
per Minute (RPM) |
FIGURE C
PRODUCT FEATURES
NOTE: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram on page 13.
1.
WARNING! Always make sure the Trigger (36) of the Impact Wrench is in its “OFF” position, the Battery (37) is removed from the Impact Wrench, and the Charger (39) is unplugged from its electrical outlet prior to making any adjust- ments to the tool. (See Figure D, next page.)
2.Trigger (36): The Trigger is operated manually simply by squeezing the Trigger to turn on the Impact Wrench and releasing pressure on the Trigger to turn off the Impact Wrench. (See Figure D.)
3.Forward/Reverse Switch (32): The Forward/Reverse Switch allows you to change the rotational direction of the Impact Wrench. For a clockwise rotation, move the Forward/Reverse Button to the right. For a counterclockwise rotation, move the Forward/Reverse Button to the left. To avoid damage to the Impact Wrench, always wait until the tool completely stops before changing rotational directions.
(See Figure D.)
4.1/2” Drive Impact Head (7): The 1/2” Impact Head features a spring and ball to securely hold a socket. The Impact Head accepts all sizes of standard and metric sockets having a 1/2” drive. (See Figure D.)
REV 03/05
SKU 92798 | For technical questions, please call | Page 9 |