15.Do not operate tool if under the influence of alcohol or drugs. Read warning labels if taking prescription medicine to determine if your judgement or reflexes are impaired while taking drugs. If there is any doubt, do not operate the tool.
16.Maintenance. The maintenance outlined in the “Maintenance” section of this manual should be performed regularly. For your safety, this product should be serviced or repaired regularly only by a qualified technician.
17.Compressed air only. Use clean, dry, regulated, compressed air at 90 PSI. Never use oxygen, carbon dioxide, combustible gases, or any other bottled gas as a power source for this tool.
18.Always grip the Impact Wrench firmly with both hands when operating the tool.
19.Industrial applications must follow OSHA requirements.
20.Maintain labels and nameplates on the Impact Wrench. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
21.
WARNING! The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
CONNECTING TO AN AIR SUPPLY
1.For best service, you should incorporate an oiler, regulator, and
REGULATOR
FIGURE A | OILER FILTER |
SKU 95141 | For technical questions, please call | PAGE 4 |