Harbor Freight Tools 90374 operating instructions To Operate The Drill, Figure H

Page 15

To Operate The Drill:

1.WARNING! Always make sure the Trigger (3F) of the Cordless Drill is in its “OFF” position, the Battery (1A) is removed from the Drill, and the Battery Charger (1B) is unplugged from its electrical outlet prior to making any adjustments to the tool. (See Figure H.)

2.The Chuck (12F): Accepts up to 3/8” diameter drill bits (not included) and the Screwdriver Bit (31F). To install a drill bit, hold the Chuck Sleeve firmly in place and turn the Chuck (12F) counterclockwise. Insert the shank of a drill bit all the way into the Chuck. While holding the Chuck Sleeve in place, turn the Chuck clockwise to lock the drill bit in place. (See Figure H.)

3.The Trigger (3F): The Trigger is operated manually simply by squeezing the

Trigger to turn on the Drill and releasing pressure on the Trigger to turn off the Drill. (See Figure H.)

4.The Rotation Button (33F): The Rotation Button allows you to change the rotational direction of the Drill. For a clockwise rotation, move the Rotation Button to the right. For a counterclockwise rotation, move the Rotation Button to the left. (See Figure H.)

5.The Torque Setting Ring (8F): The Torque Setting Ring allows you to select up to eight different driving torque settings, depending on the job required. To change the driving torque, simply turn the Torque Setting Ring to the desired setting.

(See Figure D.)

TORQUE SETTING RING (8F)

CHUCK SLEEVE

CHUCK (12F)

ROTATION BUTTON (33F)

TRIGGER (3F)

 

DRILL HANDLE

 

BATTERY (1A)

FIGURE H

SKU 90374

PAGE 15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents For technical questions, please call 18V Cordless Combo PackGeneral Safety Rules Work AreaRead and Understand ALL Instructions Personal Safety Electrical SafetyREV 03j Tool USE and CareGrounding ServiceSee Figure C Extension CordsDouble Insulated Tools Tools with TWO Prong Plugs See Figure C, belowFigure C Symbology Specific Safety RulesREV 04f Industrial applications must follow Osha requirements Do not allow children to handle or play with these productsAssembly and Operating Instructions UnpackingSee Figure D To Operate The Flashlight See Figure E, nextREV 03j, 04f, 07k To Operate The Sander See Figure ETo Operate The Jigsaw Figure FFigure G See Figure GFigure H To Operate The DrillSee Figure H INSPECTION, MAINTENANCE, and CleaningPlease Read the Following Carefully Assembly Diagram Flashlight Parts List FlashlightNot shown Parts List SanderAssembly Diagram Sander Charger BaseAssembly Diagram Jigsaw Parts List JigsawDescription Parts List DrillAssembly Diagram Drill
Top Page Image Contents