Harbor Freight Tools 94108 operating instructions Impact Wrench Safety Precautions, Unpacking

Page 4

Impact Wrench Safety Precautions

19.Only use Impact Sockets with this tool. Standard sockets will not withstand the force applied by this tool, and may break, possible causing personal injury and/ or property injury.

20.Use only specified operating air pressure. Never operate tool above the recommended working pressure of 100 PSI.

21.Do not use combustible gases. Do not use combustible gases as a power source, or use tool in areas where combustible gases are stored.

22.OSHA Guidelines. Industrial applications must follow OSHA guidelines.

23.Air Compressor. Read and adhere to all warnings and instructions of the Air Compressor Instruction Manual.

Warning:The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be under- stood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

Unpacking

When unpacking, check to make sure the following components shown below are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.

Impact Wrench

Side Handle (8)

Allen Wrench

Cap Screws (7)

SKU 94108

For technical questions, please call 1-800-444-3353

Page 4

Image 4
Contents For technical questions and replacement parts, please call 94108Specifications Safety Warnings and PrecautionsRead all instructions before using this tool Save This ManualFor technical questions, please call Impact Wrench Safety Precautions UnpackingAssembly Oiler and Filter ConnectionAir Inlet Connector Rotation / Torque Knob Maintenance Parts List Assembly Drawing Limited 90 DAY Warranty Lubrication
Related manuals
Manual 10 pages 49.73 Kb