OPERATION (continued)
Caution: Never increase pressure at the air compressor regulator to achieve more torque.
7.When finished, release the Trigger (36), and lift the Impact Wrench off the nut.
8.Remove the air supply hose, then squeeze the Trigger (36) again to release any remaining air pressure in the Impact Wrench air chamber.
Maintenance
1.After each use, wipe the Impact Wrench with a clean cloth to remove any dirt and grease buildup.
2.To maintain tool life, always lubricate the air line by adding a few drops of pneumatic tool oil to the air line (or Air Inlet) before each use. Or, install the automatic
3.Before each use, drain water out of the air compressor tank and condensation from the air lines. Refer to the Air Compressor Operation Manual.
4.Store the Impact Wrench in a clean and dry location.
SKU 94108 | For technical questions, please call | Page 7 |