Charger by pulling on the Power Cord. Keep the Power Cord away from heated surfaces.
8.To avoid electrical shock, do not handle the Charger (48), its Power Cord Plug, or the Impact Wrench with wet hands.
9.Keep the Handle of the Impact Wrench dry, clean, free from oil and grease.
10.Avoid unintentional starting. Make sure you are prepared to begin work before turning on the Impact Wrench.
11.Never leave the Charger (48) unattended when it is plugged into an electrical outlet. Make sure to unplug it from its electrical outlet before leaving.
12.Always turn off the Impact Wrench and unplug the Charger (48) from its electrical outlet before changing accessories or performing any inspection, maintenance, or cleaning procedures.
13.Always switch to a fresh Battery (30) when tool performance begins to diminish. Severe heat is most destructive to a Battery. The more heat generated, the faster the Battery loses power. A Battery that gets too hot can be permanently damaged. Never
14.Battery (30) leakage may occur under extreme usage or temperature conditions. If Battery fluid comes in contact with skin, wash with soap and water and rinse with lemon juice and vinegar. If the fluid comes into contact with the eyes, flush with water for several minutes and contact a doctor immediately.
15.Never burn the Battery, as it can explode in a fire. Do not charge the Impact Wrench if it has a leaking Battery. Contact local solid waste authorities for instructions on correct disposal or recycling of the Battery.
16.WARNING! People with pacemakers should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker.
WARNING: This product contains or, when used, produces a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. (California Health & Safety Code 25249.5, et seq.)
SKU 94855 | PAGE 6 |