Automatic Touch Hold® Mode
WWarning
To avoid electric shock, do not use the Touch Hold® to determine if a circuit with high voltage is dead. The Touch Hold® mode will not capture unstable or noisy readings.
The Touch Hold® mode automatically captures and displays stable readings. Press Rfor 2 seconds while turning the meter on.
V DC | H | V DC |
V DC | ||
V | V | V |
2 seconds
+ | _ | _ | + | _ |
|
|
|
single beep
hr3f.eps
When the meter captures a new input, it beeps and a new reading is displayed. To manually force a new measurement to be held, press R.
Note
Stray voltages can produce a new reading.
To exit the Touch Hold® mode, turn the meter off.
Bar Graph
The bar graph shows readings relative to the full scale value of a displayed measurement range and indicates polarity.
hr16f.eps