CAUTION
Use the Setting Appropriate for the Job. Do Not Set the Power Setting Higher Than Needed. Damage to Parts Could Result.
Step 5: Select the power setting for Loosening by adjusting the AIR REGULATOR (#46) located on the bottom of the Impact Wrench as shown
in Figure 3. When the Air Regulator is completely screwed in it is at it’s lowest setting. Air pressure increases as you loosen
the Air Regulator.
Air Regulator (#46)
Figure 3 — Adjusting the Reverse Power Setting
Step 6: Select the direction of the Wrench (forward or reverse) by pushing the REVERSE VALVE (#48) located on the handle of the Impact Wrench as shown in Figure 4.
Reverse Valve | Valve in Forward Position. |
Push in to Reverse | |
(#48) |
|
Figure 4 — Selecting Reverse Direction
SKU 32871 For technical questions, please call | Page 7 |