Napoleon Fireplaces GSST8P, GSST8N manual Finishing, Tmcss Mounting Cabinet Installation, Template

Page 8

8

FINISHING

TMCSS MOUNTING CABINET INSTALLATION

!WARNING

Before starting the installation remove the

1

INSTALLATION

protective layer from all three components that

TEMPLATE

make up the GSST8 (cabinet, frame, and Torch)

 

 

 

NOTE: It is recommended that all fasteners be stainless steel.

1. Using the installation template (W122-0401) supplied, determine the best mounting location for your new Torch. (refer to your manual for clearances) Mark all 14 hole centres on the wall (surface) using the template.

2. Remove the template. Depending on the surface and fasteners, drill the appropriate holes. Hold the Torch up, aligning the mounting brackets to the mounting holes. Secure the Torch to the wall using the appropriate fasteners. NOTE: The Torch has been designed to have a 1/2” clearance between the rear outer panel and the mounting surface.

3. Start the fasteners into each of the six remaining

TORCH

 

mounting holes. Align the keyholes of the frame to the

 

heads of the fasteners and slide the frame down onto the

 

fasteners. Ensure the frame is plumb and level before

MOUNTING

tightening the fasteners. NOTE: It is recommended that

FRAME

the gas and electrical be connected to the appliance

 

at this stage. Both must enter the appliance at the

 

opening created between the bottom of the Torch

CABINET

and the bottom of the mounting frame.

4.Slide the front of the cabinet over the mounting

frame, ensuring the “mesh” is to the top. Start each of

FIGURE 6

4

the four screws (supplied) through the slots.

Once the

 

cabinet has been adjusted for depth the

 

3

 

four screws can be tightened.

 

 

 

 

 

2

MOUNTING BRACKET

KEYHOLE

W415-0689 / 06.25.08

Image 8
Contents Installation Operation Instructions Table of Contents Napoleon GAS Fireplace 5 Year Limited Warranty General Instructions General InformationRates and Efficiencies Care of Glass and Plated PartsGAS Installation InstallationDimensions Hard Wiring Connection Electrical ConnectionClearances to Combustibles Combustion and Ventillation AIRInstallations Canada Tmcss Mounting Cabinet Installation InstallationFinishing TemplateGlass Removal Rain TabsDoor Removal Tfsso Frame Installation Logo PlacementAccent Glass Installation LK8 Light Installation OptionalOperating Instructions Lighting InstructionsTo Turn OFF GAS Rating PlateMaintenance AdjustmentsCleaning GAS Pressure Adjustment Venturi AdjustmentReplacements Replacement PartsAccessories # Part NO. DescriptionRESEAL. do not OVER-TORQUE Trouble Shooting GuidePressure READINGS, be Sure to Replace CAP to Fireplace Service History

GSST8P, GSST8N specifications

The Napoleon Fireplaces GSST8N and GSST8P are two standout models in the realm of gas fireplaces, celebrated for their remarkable design, efficient heating capabilities, and advanced technologies. These units provide a sophisticated option for homeowners looking to create a cozy atmosphere while enjoying modern convenience.

One of the notable features of the GSST8N and GSST8P is their sleek design, seamlessly integrating into any space. With options for both natural gas (GSST8N) and propane (GSST8P), these fireplaces are versatile and can cater to different installation requirements. Their large viewing area is framed by a contemporary design, offering an impressive visual appeal while allowing the mesmerizing flames to take center stage.

The advanced heating technology embedded within these models is worth mentioning. The GSST8N and GSST8P utilize efficient burner systems, providing optimum heat output while minimizing gas consumption. With an impressive efficiency rating, users will appreciate the balance of warmth and energy savings. The adjustable flame feature allows users to customize the fire to their desired size and intensity, enhancing the overall ambiance.

Safety is also a key consideration in the design of the GSST8N and GSST8P. These fireplaces are equipped with a range of safety features, including an automatic shut-off system that activates in case of any malfunction or irregularity. This not only provides peace of mind but also ensures the longevity and reliability of the units.

Another remarkable aspect of these models is their user-friendly control options. The fireplaces can be operated via a simple remote control, enabling users to adjust settings effortlessly from the comfort of their couch. Additionally, they are compatible with smart home systems, allowing for integration into a wider home automation framework.

For those who appreciate the aesthetic value of traditional fireplaces, the GSST8N and GSST8P do not disappoint. The realistic log set and ember bed create a genuine fireplace atmosphere, enhancing the overall experience. The units also offer multiple decorative media options, giving homeowners the ability to personalize their fireplace according to their preferences.

In summary, the Napoleon Fireplaces GSST8N and GSST8P stand out for their modern design, efficient heating capabilities, extensive safety features, and convenient control options. With the ability to seamlessly blend aesthetics with functionality, these fireplaces are an excellent choice for anyone looking to elevate their living space.