Chicago Electric 96531 Grounded Tools Tools with Three Prong Plugs, Extension Cords

Page 7

before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.

Grounded Tools: Tools with Three Prong Plugs

1.Tools marked with “Grounding Required” have a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet. If the tool should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user, reducing the risk of electric shock. (See 3-Prong Plug and Outlet.)

2.The grounding prong in the plug is connected through the green wire inside the cord to the grounding system in the tool. The green wire in the cord must be the only wire connected to the tool’s grounding system and must never be attached to an electrically “live” terminal. (See 3-Prong Plug and Outlet.)

3.The tool must be plugged into an appropriate outlet, properly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like those in the following illustration.

(See 3-Prong Plug and Outlet.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3-Prong Plug and Outlet

 

Outlets for 2-Prong Plug

Double Insulated Tools: Tools with Two Prong Plugs

1.Tools marked “Double Insulated” do not require grounding. They have a special double insulation system which satisfies OSHA requirements and complies with the applicable standards of Underwriters Laboratories, Inc., the Canadian Stan- dard Association, and the National Electrical Code.

(See Outlets for 2-Prong Plug.)

2.Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-Prong Plug.)

Extension Cords

1.Grounded tools require a three wire extension cord. Double Insulated tools can use either a two or three wire extension cord.

SKU 96531

For technical questions, please call 1-800-444-3353.

Page

Image 7
Contents Digital soldering station For technical questions or replacement parts, please callContents Save This Manual Important Safety InformationGeneral Safety Rules Power tool use and care Grounding Specific Safety RulesSee 3-Prong Plug and Outlet Outlets for 2-Prong Plug Grounded Tools Tools with Three Prong PlugsDouble Insulated Tools Tools with Two Prong Plugs Extension CordsFeet See Table aList of contents SpecificationsSet Up Instructions SymbologyOperating Instructions Tool set upFunctions SKU For technical questions, please call Work piece set upGeneral operating instructions Soldering TipsPosition, as marked with an O below the Power Switch Maintenance And ServicingRisk of serious personal injury from accidental starting or Replacing the Soldering Iron Cleaning, maintenance, and lubricationReplacing the Fuse Part Description Qty Parts List & assembly diagramRecord Product’s Serial Number Here Limited 90 DAY Warranty