Auto-Sleep and Auto Off Functions, AC Power LED

Auto-Sleep and Auto Off Functions

To prolong tip life, MFR systems with a soldering hand-piece (MFR-H1-SC, MFR-H2-ST) include an “Auto-Sleep Workstand” (WS1). When the hand-piece is placed into the workstand, the “Auto-Sleep Workstand” immediately reduces power to the hand-piece. All MFR systems have an “Auto Off” Function. The “Auto Off” Function will be engaged when the hand-piece has been idle in the sleep stand for a period of two hours. The channel LED indicator light will go from green to off. The “Auto Off” Function can be reset by cycling the power switch.

LED Indications and Meaning MFR-PS1100

MFR-PS2200

AC Power LED

•Green --- Power On

•Red ------ Ground Fault

•Off ------- Power Off

Channel LED

•	Green --- On / Ready
•	Red ------ Open connection: tip,

connector

• Off ------- Channel not selected or

channel is in Auto Off (cycle the power switch to reset)

System Specifications
Ambient Operating Temperature	10- 40°C
Maximum Enclosure Temperature	55°C
Input Line Voltage	100- 240 VAC, grounded circuit
Input Line Frequency	50/60 Hz
Power Consumption
MFR-1100	90 Watts max
MFR-2200	170 Watts max.(with both channels on)
Output Power Max.	60 Watts max. Per channel at 22°C ambient
	temperature
Output Frequency	450--480 KHz
Power Cord 3-Wire	183cm (18/3) SJT
Dimensions w x d x h
MFR-1100	90mm (3.5”), 297mm (8”), 142 mm (5.6)
MFR-2200	122mm (4.8”), 200mm (8”), 152.5mm (6”)
Certification / Marking	cTUVus, CE
Tip-to-Ground Potential	<2mV
Tip-to-Ground Resistance	<2 ohms
Idle Temperature Stability	± 1.1°C in still air
Hand-piece Cable Length	L=122cm (48”), burn proof, ESD safe
Hand-piece Connector	8-pin circular DIN
Workstand Dimensions w x d x h	100 mm (4”) x 200 mm (8”) x 100 mm (4”) max