Mitsubishi Electronics HL650U user manual Using the ProjectorView, How to start up, EN-12

ProjectorView

Using the ProjectorView

This section describes ProjectorView, a tool to control and monitor the projector’s operations by a Web browser. The major functions of ProjectorView are:

•Power on/off

•Input source switching

•State information indication (projector’s name, temperature, lamp operation time, error/alert, etc.)

•E-mail notification in case of error/alert

How to start up

1	Start the Projector-Control Device Installer.
	• Select [Start] - [All Programs] - [Mitsubishi] -
	[Mitsubishi Projector - Control Device Installer] (in
	the case of Windows® XP).

2	Expand the tree structure on the left pane until the IP
	address you set appears.

3 Select the WEB Configuration tab.

4	Click the External Browser button or Go button.
	External Browser button	: The browser starts on a separate window.
	Go button	: The browser starts on the Projector-Control Device Installer window.

(Note)

•You can start ProjectorView by directly entering the URL of the Web browser “http://IP address you set” instead of by clicking the External Browser button.

•When you are using a proxy server, don’t enable the proxy when accessing this IP address.

•You can open only 1 browser screen from the device installer.

•It is possible to control a projector using 2 computers running “ProjectorView”. However, use only 1 computer for Telnet setting.

EN-12