14 | OPERATING THE SYSTEM |
|
Dim mode
You can select the desired brightness for the display.
•Press DIM to select DIM 1, DIM 2, DIM 3 or DIM OFF display mode.
ªThe DIM appears on the display.
ª"DIM 1", "DIM 2", "DIM 3" or "DIM OFF" will be displayed depending on the mode selected.
DIM OFF - normal brightness with Spectrum Analyzer On
DIM 1 - normal brightness with Spectrum Analyzer Off
DIM 2 - half brightness with Spectrum Analyzer On
DIM 3 - half brightness with Spectrum Analyzer Off and all LEDs on the system will be switched off.
Volume Control
Adjust VOLUME to increase or decrease the sound level.
For Personal Listening
Connect the headphones plug to the
nsocket at the front of the system. The speakers will be muted.
MUTE (only on remote control)
This feature allows you to temporarily switch off the sound without switching off the system when you require a moment of silence.
1Press MUTE on the remote control to switch off the sound.
ª "MUTE" will be displayed.
2Press MUTE again on the remote control or increase the VOLUME level to switch on the sound.
Sound Control
For Optimal sound listening, you can only select one of the following sound control at a time : DSC,VEC or BASS/TREBLE.
DIGITAL SOUND CONTROL (DSC)
The DSC feature enables you to adjust the system to suit your type of music.
1Press to select the DSC feature.
2Adjust the JOG to select the desired Digital Sound Control setting :
OPTIMAL, CLASSIC,TECHNO, VOCAL, ROCK or JAZZ.
ªThe selected digital sound is encircled.
ª"OPTIMAL, CLASSIC, TECHNO, VOCAL, ROCK or JAZZ" will be displayed.
Note:
– For neutral setting, select CLASSIC.
VIRTUAL ENVIRONMENT
CONTROL (VEC)
The VEC feature enables you to adjust the system to select a type of environment.
1Press to select the VEC feature.
2Adjust the JOG to select the desired Virtual Environment Control setting :
HALL, CLUB, DISCO, CINEMA, CONCERT or ARCADE.
ªThe selected environment is encircled.
ª"HALL, CLUB, DISCO, CINEMA, CONCERTor ARCADE" will be displayed.
BASS/TREBLE
The BASS/TREBLE features enable you to define the sound processor settings for Bass and Treble.
1Press to select the BASS/TREBLE feature.
ªThe BASS and TREBLE LED will be lit.
ª"ADAPT BASS AND TREBLE LEVELS" will be displayed.
2Use BASS/TREBLE CONTROL to select the desired BASS or TREBLE level respectively.
ªThe BASS/TREBLE level will
increase or decrease between level +3 and
pg | 14 | 2/16/00, 9:05 AM | 3139 116 19662 (ENG) |