Parkside PEH30 manual Electric planer PEH Introduction, Proper use, Features and equipment

Page 6

Introduction

The following pictograms are used in these operating instructions / on the device:

 

Read instruction manual!

Safety class II

 

Observe caution and safety notes!

Wear hearing protection, dust

 

protection mask, protective glasses

 

 

and protective gloves.

 

Caution – electric shock!

Keep children away from

 

Danger to life!

electrical power tools!

 

Explosive material!

For indoor use only!

V~ Volt (AC)

Check that the device, mains lead

and plug are in good condition!

W

Watts (Effective power)

Dispose packaging and appliance in

an environmentally-friendly way!

 

n0

Design no-load speed

 

 

 

Electric planer PEH 30

Introduction

Please make sure you familiarise your- self fully with the way the device works

before you use it for the first time and that you understand how to handle electrical power tools correctly. To help you do this please read the accompanying operating instructions. Keep these instructions in a safe place. If you pass the device on to anyone else, please ensure that you also pass on all the documentation.

Proper use

The device is suitable for planing wood in the form of beams or boards or the like if the workpiece is held securely in a fixed position. The device is also suitable for chamfering edges and for rebating. Any other use or modification to the device shall be considered as improper use and could give rise to considerable risk of accident. The manufacturer will not accept liability for loss or damage arising from improper use. Not suitable for commercial use.

Features and equipment

1Safety lock-out

2 ON / OFF switch

3 Planing debris removal port (right / left selectable)

4 Belt cover

5 Belt cover screws

6 Guide fence

7 Guide fence fixing screws

8 Fixing nut for setting rebate width

9 Sole

10V-groove

11Rebate depth stop fixing screw

12Rebate depth stop

13Rotary control for setting planing depth

14Cutting depth scale

15Reducer piece

16Parking shoe

17Blade shaft

18Cutting element

19Plane blade fixing screws

20Plane blade

21Side blade shaft guard

22Allen key

23Drive belt

24Large belt wheel

25Small belt wheel

26Open spanner

6GB/IE/CY

Image 6
Contents PEH Page Page Page Table of contents Electric planer PEH Introduction Features and equipmentIntroduction Proper useElectrical safety Technical dataWorkplace safety Included itemsGeneral safety advice for electrical power tools Personal safetyCareful handling and use of electrical power tools Safety advice relating specifically to power planers Dust generated while planing could be hazardousSetting the cutting depth Original accessories/ attachmentsSwitching On / Off Vacuum extraction of dust / debris see Fig. aPreparing for use Clean out the planing debris removal port 3 regularly Maintenance and cleaningService centre Warranty Replacing a drive belt see Figs. F + GDisposal Accordance with European DirectiveElectrical devices Kompernass Gmbh