Machine will not start/ | 7. | Motor starter failure. |
restart or repeatedly |
|
|
trips circuit breaker |
|
|
or blows fuses |
|
|
| 8. | Motor failure. |
9. Miswiring of the unit.
Therefore,
10. On/off switch failure.
20
7.(continued)
If voltage between starter and motor is incorrect, you have a starter problem.
If voltage between starter and motor is correct, you have a motor problem.
8.If electric motor is suspect, you have two options: Have a qualified electrician test the motor for function or remove the motor and take it to a quality electric motor repair shop and have it tested.
9.Double check to make certain all electrical connections are correct and properly tight . The electrical connections other than the motor are preassembled and tested at the factory.
the motor connections should be double checked as the highest probability for error. If problems persist, double check the factory wiring.
10.If the on/off switch is suspect, you have two options: Have a qualified electrician test the switch for function, or purchase a new on/off switch and establish if that was the problem on changeout.