Powermatic 201 instruction manual Safety

Page 6

Familiarize yourself with the following safety notices used in this manual:

CAUTION: (This means that if precautions are not heeded, it may result in minor or moderate injury and/or possible machine damage)

WARNING: (This means that if precautions are not heeded, it could result in serious injury or possibly even death).

SAFETY

Familiarize yourself with the location and content of this decal on your machine.

!

1.

Read instruction manual before operating machine.

6.

Disconnect machine from power source before making any

2.

Do not operate without all guards properly installed.

 

adjustments or cleaning chips away from machine.

3.

Remove or fasten loose articles of clothing such as neckties, etc.

7.

Keep the floor around machine clean and free from scraps,

 

Contain long hair.

 

sawdust, oil and grease to minimize the danger of slipping.

4.

Remove jewelry such as finger rings, watches, bracelets, etc.

8.

Do not operate this machine while under the influence of alcohol

5.

Use approved safety glasses and/or face shield to protect eyes, and

 

or drugs.

 

use other personal safety equipment as required. Do not wear

9.

Failure to comply with these warnings may result in serious

 

gloves.

 

personal injury.

DO NOT REMOVE OR OBSCURE THIS LABEL

6

Image 6
Contents Planer Warranty & Service Table of Contents Safety Rules Page Safety Specifications Model 201, 22 Planer Table with standard extensionsInstallation ReceivingAdjustments InspectionOpening Hood Feed System of Your Planer Chipbreaker Outfeed Roll Test Cutting TROUBLE-SHOOTING Table AdjustmentsFeed Restriction Chatter Maintenance LubricationTROUBLE-SHOOTING Operating Problems 201 Planer TROUBLE-SHOOTING Mechanical & Electrical Problems PlanerPage Parts List Gearbox Assembly Model 201 Planer Description QuantityGearbox Assembly Model 201 Planer Parts List Cutterhead Assembly Model 201 Planer 6012179 Cutterhead Assembly Model 201 Planer Parts List Top Cover Assembly Model 201 Planer Top Cover Assembly Model 201 Planer Parts List Column Assembly Model 201 Planer Column Assembly Model 201 Planer Parts List Table Assembly Model 201 Planer Table Assembly Model 201 Planer Parts List Base Assembly Model 201 Planer 6012048 Socket Head Cap Screw, M10 x 1.5P x 20Lg 6012116 Base Assembly Model 201 Planer Electrical Schematic Model 201 Planer 5HP 1Ph Electrical Schematic Model 201 Planer 5HP 3Ph Electrical Schematic Model 201 Planer 5HP 3Ph Page Page ALL Rights Reserved