Ryobi Maintenance and Blade Replacement for HPL51 Planer
Page 14

MAINTENANCE

REPLACING BLADES

See Figures 13, 14 and 15.

The blades in your planer are reversible.Therefore, you can reverse the blades when one edge becomes dull.

Always replace or reverse blades in pairs. Do not attempt to sharpen blades. If the blades become dull, replace them.

When replacing the blades, use recommended replace- ment blade only, Ryobi part number 6986101.

WARNING:

Blades are sharp, use extreme caution when replacing the blades. Failure to heed this warning can result in serious personal injury.

1. Unplug the planer.

WARNING:

Failure to unplug the planer could result in accidental starting causing serious injury.

2.Secure the planer in an upside down position.

3.Loosen the three screws securing the blade on the blade holder using the blade wrench provided.

NOTE: Do not over-loosen the screws. If screws are too loose, alignment of the new blade will not be accurate.

NOTE: Before removing the old blades, take notice of the direction of cut as well as how the tapered edge of the old blades are oriented.The tapered edge of the new blades must be in the same orientation as the original blades.

4.Push the blade (to the right) out of the blade holder using the tip of a screwdriver.

5.Remove the old blade from the blade holder.

NOTE: If blade cannot be easily pushed out of blade holder after loosening blade securing screws, use a block of wood to break the blade loose from the blade holder, with a short sharp blow. Then push the blade with a screwdriver to remove. If necessary, tap the block of wood sharply with a small hammer to break the blade loose.

6.Clean any sawdust or wood chips from around the blade area.

7.Slide the new blade into the slot of the blade holder.

8.Use a screwdriver to push the blade into the blade holder until it is centered into position.

9.Retighten the three blade securing screws using the blade wrench.

10.Repeat the above procedure to change the other blade.

Page 14

SCREW

BLADE

WRENCH

BLADE

HOLDER

Fig. 13

BLADE

SCREWDRIVER

Fig. 14

Fig. 15

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Operators Manual Table of Contents IntroductionGeneral Safety Rules Work AreaSpecific Safety Rules ServiceSymbols Symbol Name DESIGNATION/EXPLANATIONDouble Insulation ElectricalExtension Cords Electrical ConnectionApplications Product SpecificationsUnpacking InstructionsFeatures Know Your PlanerAdjusting the Planing Depth AdjustmentsAdjusting the Exhaust Direction Attaching the Dust BAGOperating the Planer OperationSTARTING/STOPPING the Planer KickstandPlaning ChamferingTo Plane Edges Planing Edges and Making Rabbet CutsTo Attach the Edge Guide for Planing Edges To Attach the Edge Guide for Making Rabbet CutsGeneral MaintenanceCleaning the Exhaust Port and Emptying the Dust BAG LubricationReplacing Blades See Figures 13, 14Replacing the Belt See Figures 16Extension Cord Caution HPL51

HPL51 specifications

The Ryobi HPL51 is a highly efficient and versatile high-pressure cleaner designed to meet the needs of both professional users and DIY enthusiasts. Its innovative design and powerful performance make it an essential tool for tackling various outdoor cleaning tasks.

One of the standout features of the Ryobi HPL51 is its robust 1800W electric motor, which delivers an impressive pressure output of up to 150 bar. This translates to a powerful cleaning capability that can effectively remove dirt, grime, and stains from a wide range of surfaces including driveways, patios, decks, and vehicles. The adjustable pressure settings allow users to customize the power output depending on the cleaning task at hand, ensuring optimal results without risking surface damage.

Incorporating advanced technology, the HPL51 is equipped with a durable axial pump that enhances efficiency and reliability. This pump design minimizes maintenance requirements while maximizing water flow, making it ideal for prolonged cleaning sessions. Additionally, the inclusion of a 7-meter high-pressure hose provides ample reach for larger areas, allowing users to maneuver easily without the need to constantly reposition the cleaner.

The HPL51 also features an integrated detergent tank that simplifies the process of applying cleaning solutions. With an adjustable nozzle, users can switch between high-pressure cleaning and detergent application effortlessly, optimizing the cleaning process based on specific needs. This versatility extends to the selection of nozzles that come with the unit, including varying spray patterns to tackle different surfaces with the appropriate intensity.

Portability is another essential characteristic of the Ryobi HPL51. The unit is designed with a lightweight and compact structure, making it easy to transport and store. Built-in wheels and a telescopic handle enhance maneuverability, allowing users to navigate uneven terrain with ease.

Furthermore, Ryobi places a strong emphasis on user safety and comfort. The HPL51 includes ergonomically designed handles that reduce strain during extended use, and safety features such as a thermal overload protection switch prevent overheating.

In conclusion, the Ryobi HPL51 high-pressure cleaner is a potent tool that combines power, efficiency, and user-friendly features. Whether for residential projects or professional cleaning tasks, it stands out as a reliable solution for achieving a pristine clean with ease and convenience. Its robust technology and thoughtful design cater to a wide range of cleaning applications, making it an excellent investment for anyone looking to maintain their outdoor spaces.
Top Page Image Contents