ASSEMBLING CUTTERHEAD GUARD
Position cutterhead guard (A) Fig. 7, on top cover of machine. Align holes in cutterhead guard (A) Fig. 7, with holes in top cover and fasten with six 12mm button head screws (B) and flat washers, five of which are shown.
B
A
Fig. 7
ASSEMBLING DUST HOOD
A dust hood with a
Position dust hood (A) Fig. 8, against the rear of the machine and on top of cutterhead guard (B). Align the holes and fasten the dust hood (A) Fig. 9, to the cutterhead guard (B) using seven 12mm button head screws (C) and flat wash- ers, four of which are shown.
BA
A
C
B
Fig. 8 | Fig. 9 |
9